+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: mini nbt2 evo after flash does not work (/showthread.php?tid=5492)
mini nbt2 evo after flash does not work - hsary - 07-04-2023
Hi all,
i have nbt2 evo 2Gb after was working and after clear v850 with HU engineering and flash it with psdz 18-03 FOR ID6 i got this errors
0xE1C444: MOST: Ring does not wake up
0xB7F8B8: Connection Head Unit to Bluetooth Antenna Base: Line Break
0xB7F8C3: CID does not respond (hardware failure: failure of CID communication)
0xB7F8E5: Telnet / SSH mode active
0xB7F8F7: System: Software manipulation error detected
i have done the programming on bench and tried to close the telnet by tool32.
is there any help i can do on this as give no signal.
thanks in advance
RE: mini nbt2 evo after flash does not work - TheNine90 - 07-04-2023
Did you code the screen to correct settings?
RE: mini nbt2 evo after flash does not work - hsary - 07-05-2023
(07-04-2023, 01:13 PM)TheNine90 Wrote: Did you code the screen to correct settings?do u mean to to apix1?
RE: mini nbt2 evo after flash does not work - TheNine90 - 07-05-2023
Yes. apix color com