+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Meet (https://www.bimmerscene.com/forumdisplay.php?fid=5)
+--- Forum: New Member Intro (https://www.bimmerscene.com/forumdisplay.php?fid=6)
+--- Thread: Hi, I'm from Boston and doing e60 CIC retrofit (/showthread.php?tid=5576)
Hi, I'm from Boston and doing e60 CIC retrofit - HankReardon - 07-31-2023
Hi All-
I'm a new member from across the pond in Boston.
Currently, I'm nearing the end of a CCC to CIC retrofit for my 2007 (build date 06/06) 550i.
Perhaps someone on here has experienced the same glitch as I'm experiencing.
I updated the car's VO to #0909 and added $609.
I sucessfully flashed all 3 modules (63, 62 & A0) with ICOM MOST B and default coded each of them with NCS Expert. Updates show up with correct VINs in INPA.
E60 cuurrent VO list.docx (Size: 12.27 KB / Downloads: 7)
Trouble is my CID (iDrive display) does not work. It only glows orange for about 20 seconds (no BMW logo, CIC radio works fine) and then turns off.
It throws a a code in INPA and ISTA- A468 which implies a wiring issue. Same thing with two different known good CID displays. Cable connection is good, checked all four pins in coax for continuity. I have reset the head unit multiple times with same result- radio/cd works fine, display backlight turns orange for 20 sec and then turns off. Head unit boots fine and fan does not run constantly.
I think the issue has to do with the VO and the car still looking for the old CCC display rather than the retrofitted CIC display. I attached UIF and ID screenshots from INPA.
Thanks all, for any thoughts.....
Hank
RE: Hi, I'm from Boston and doing e60 CIC retrofit - Rob - 08-01-2023
Welcome
RE: Hi, I'm from Boston and doing e60 CIC retrofit - adelin731 - 08-10-2023
Welcome to the Scene!