Hi, I'm from Boston and doing e60 CIC retrofit

[HankReardon]

Hi All-

I'm a new member from across the pond in Boston.


Currently, I'm nearing the end of a CCC to CIC retrofit for my 2007 (build date 06/06) 550i.

Perhaps someone on here has experienced the same glitch as I'm experiencing.
I updated the car's VO to #0909 and added $609.
I sucessfully flashed all 3 modules (63, 62 & A0) with ICOM MOST B and default coded each of them with NCS Expert.  Updates show up with correct VINs in INPA.

  E60 cuurrent VO list.docx (Size: 12.27 KB / Downloads: 2)

Trouble is my CID (iDrive display) does not work.  It only glows orange for about 20 seconds (no BMW logo, CIC radio works fine) and then turns off.  
It throws a a code in INPA and ISTA- A468 which implies a wiring issue.  Same thing with two different known good CID displays. Cable connection is good, checked all four pins in coax for continuity. I have reset the head unit multiple times with same result- radio/cd works fine, display backlight turns orange for 20 sec and then turns off. Head unit boots fine and fan does not run constantly.

I think the issue has to do with the VO and the car still looking for the old CCC display rather than the retrofitted CIC display. I attached UIF and ID screenshots from INPA.

Thanks all, for any thoughts.....

Hank

[Rob]

Welcome

[adelin731]

Welcome to the Scene!