WinKFP DME (MSV80) Coding Issue for E70 - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW E Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=2) +--- Thread: WinKFP DME (MSV80) Coding Issue for E70 (/showthread.php?tid=6009) |
WinKFP DME (MSV80) Coding Issue for E70 - Moops001 - 01-24-2024 Hi all, I have been having an issue for the past several days with WinKFP, where I am unable to flash a replacement DME for my water damaged DME. WinKFP is spitting out the following error (screen shot below), 05msv80.ipo file not found. I have downloaded/loaded a multitude of different sp datens files, i.e. v67,68,70, to no avail. Any help is welcome. Am I beating down a broken door? Should I just switch to ISTA P to code in the replacement DME. Vehicle: E70 MSV80 DME, LK91615 Many thanks RE: WinKFP DME (MSV80) Coding Issue for E70 - Enabled - 02-08-2024 I wonder why your WinKFP is choosing those files. It should be 12MSV80.xxx RE: WinKFP DME (MSV80) Coding Issue for E70 - Hamburger2024 - 04-17-2024 Hello, I have the same problem with water damaged DME; then CAS3+ died (would not turn on ignition (relay 15). I have replacement DME and a CAS3 (from wreaked X5). Now X5 cranks, but No start (DME immobilizer). I updated all modules with INST-P; but still NO start. Only Code left is the is the DME immobilzer. I am trying to synch DME with CAS or Alighn Start Values. Can anyone help ? |