WinKFP DME (MSV80) Coding Issue for E70

[Moops001]

Hi all, 

I have been having an issue for the past several days with WinKFP, where I am unable to flash a replacement DME for my water damaged DME.

WinKFP is spitting out the following error (screen shot below), 05msv80.ipo file not found. I have downloaded/loaded a multitude of different sp datens files, i.e. v67,68,70, to no avail. 

Any help is welcome. Am I beating down a broken door? Should I just switch to ISTA P to code in the replacement DME. 

Vehicle: E70 MSV80 DME, LK91615

Many thanks

[Enabled]

I wonder why your WinKFP is choosing those files. It should be 12MSV80.xxx

[Hamburger2024]

Hello, I have the same problem with water damaged DME; then CAS3+ died (would not turn on ignition (relay 15). I have replacement DME and a CAS3 (from wreaked X5). Now X5 cranks, but No start (DME immobilizer). I updated all modules with INST-P; but still NO start. Only Code left is the is the DME immobilzer. I am trying to synch DME with CAS or Alighn Start Values.

Can anyone help ?