+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: Generating TAL failed! [C041] (/showthread.php?tid=698)
Generating TAL failed! [C041] - Zak_F32 - 09-08-2020
Hi guys, trying to flash my iDrive firmware to enable fullscreen following a guide.
I'm up to the part that requires you to Calculate a TAL and get the following error
Generating TAL failed! [C041]
DetailInfo must not be null for ECU ECUId:FEM_BODY_0x40
I've checked the VIN across on the FA data and the VIN is correct with the car, the car is connected to E-Sys 3.30.1 via ENET cable selected Connected via VIN.
Does anyone have a solution to this problem?
Thanks,
RE: Generating TAL failed! [C041] - babyk - 09-08-2020
hello
do you have Teamviewer for me to connect and have a look?
I can try to help
RE: Generating TAL failed! [C041] - Zak_F32 - 09-08-2020
(09-08-2020, 06:28 PM)babyk Wrote: helloThat would be very kind. I’ll PM you now.
do you have Teamviewer for me to connect and have a look?
I can try to help
thank you so much.
RE: Generating TAL failed! [C041] - Alec01 - 09-08-2020
(09-08-2020, 08:14 PM)Zak_F32 Wrote:(09-08-2020, 06:28 PM)babyk Wrote: helloThat would be very kind. I’ll PM you now.
do you have Teamviewer for me to connect and have a look?
I can try to help
thank you so much.
Hi Zak,
I highly recommend Babyk, as he generously spent a lot of his time to help me in the past.
A great coder !
just be careful of time zone difference, as he is located in Singapoure.
Good luck, and let us know how you finally resolved this TAL failure, as it might help others.
RE: Generating TAL failed! [C041] - Zak_F32 - 09-08-2020
(09-08-2020, 08:25 PM)Alec01 Wrote:(09-08-2020, 08:14 PM)Zak_F32 Wrote:(09-08-2020, 06:28 PM)babyk Wrote: helloThat would be very kind. I’ll PM you now.
do you have Teamviewer for me to connect and have a look?
I can try to help
thank you so much.
Hi Zak,
I highly recommend Babyk, as he generously spent a lot of his time to help me in the past.
A great coder !
just be careful of time zone difference, as he is located in Singapoure.
Good luck, and let us know how you finally resolved this TAL failure, as it might help others.
Hi Alec,
Thank you that is really good to know. I'm actually located in United Kingdom, the exact opposite of Singapore! I'm a total amateur with this software as this is the first time I've ever attempted a module flash. I spent a massive amount of time looking around previous posts on other forums regarding this issue with no luck - finding it rather frustrating people manage solve the problem but not posting their solution. I'm currently in the process of updating my PSdZ Data to the latest version. I'll figure it out with @babyk and maybe he can find a solution we can share with the rest of the forum.
RE: Generating TAL failed! [C041] - Alec01 - 09-08-2020
What is your current iDrive I-Step ? Is it id5 or id6 ?
In order to benefit to Carplay fullScreen, you don't need the latest I-step.
Just flash to I-step versions 18-07 or 18-03, so you can still perform FDL coding via USB (.bin files), and at the same time get fullScreen.
If you flash to latest I-Step (newer to 18-11), you will only be able to FDL coding via ENET cable.
RE: Generating TAL failed! [C041] - Zak_F32 - 09-09-2020
(09-08-2020, 09:18 PM)Alec01 Wrote: What is your current iDrive I-Step ? Is it id5 or id6 ?I believe it’s factory shipment of 16-07-502 and my P data was for 18-03. I have the FDL coding file ready to go it’s just a case of changing I-Step version and doing exactly what you said! Unfortunately ran into this problem whilst attempting the update.
In order to benefit to Carplay fullScreen, you don't need the latest I-step.
Just flash to I-step versions 18-07 or 18-03, so you can still perform FDL coding via USB (.bin files), and at the same time get fullScreen.
If you flash to latest I-Step (newer to 18-11), you will only be able to FDL coding via ENET cable.
RE: Generating TAL failed! [C041] - Zak_F32 - 02-24-2021
Edit, managed to fix the error. Basically when connecting to the car the Chassis was set at F001 connection when it needed to be F020 basic error but anyone else confused about this problem this is the solution.
If anyone needs any more help PM me,
Zak
RE: Generating TAL failed! [C041] - Omarbanan - 03-16-2022
(09-08-2020, 06:28 PM)babyk Wrote: helloCan you help me with that .
do you have Teamviewer for me to connect and have a look?
I can try to help
I have the same issue if you would like.