Bimmer Scene - Latest BMW Coding / Retrofits / Maps
ISTA 4.49.2x and PSdZData 4.52.31 problem - Printable Version

+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: ISTA 4.49.2x and PSdZData 4.52.31 problem (/showthread.php?tid=7453)

ISTA 4.49.2x and PSdZData 4.52.31 problem - V3lmu - 03-23-2025

Hey! Smile

I installed Ista version: 4.49.23. I will update the latest PSdZData Full 4.52.31 at the same time. ISTA has been installed, but there are problems with PSdZData. ISTA does not show the "Programming data" version. It only says: n/a. I found instructions by google, how to update PSdZData, but this also caused a problem. The instructions tell me to edit a file that I DO NOT HAVE. 

Can this file: ISTA_Reg_Fix_x64.reg be downloaded from somewhere?

ISTA homepage and version information

Are these instructions correct?
Quote:To install PSdZ data on a pre-installed ISTA+ setup, follow these steps:
1. Create the Data Folder:
– Go to the following directory: C:\EC-APPS\ISTA\PSdZ
– Inside this folder, create a new folder named `data_swi`. This is where the PSdZ files will be stored.
2. Unzip and Move PSdZ Files:
– Download the appropriate version of PSdZData (Full or Lite).
– Unzip the PSdZData package.
– Move all the extracted contents into the `data_swi` folder: C:\EC-APPS\ISTA\PSdZ\data_swi
3. Modify the ISTA Registry File:
– Find the file `ISTA_Reg_Fix_x64.reg` in your ISTA installation directory.
– Open it using a text editor (like Notepad).
4. Update the SWIData Version:
– In the file, search for the following line: “SWIData” = “4.39.20”
– Replace `4.39.20` with the version number of the PSdZData you are installing. Make sure it matches your version.
5. Apply the Registry Fix:
– Save the changes to the `ISTA_Reg_Fix_x64.reg` file.
– Run the `.reg` file by double-clicking it, and confirm any prompts to update the Windows registry.
6. Verify in ISTA+:
– Launch ISTA+ and check the programming tab to confirm that the PSdZ data has been properly installed and is available for use.
With these steps completed, ISTA+ should now be able to use the new PSdZ programming data for coding and programming tasks.


RE: ISTA 4.49.2x and PSdZData 4.52.31 problem - DieOfenfrische - 03-23-2025

Check out this thread:

https://www.bimmerscene.com/showthread.php?tid=5132

Go to the mega folder and download folder files_only_for_manual_install only. Inside you will find the files you need. You need to open the file with notepad or editor before you execute to change program version to yours.

RE: ISTA 4.49.2x and PSdZData 4.52.31 problem - V3lmu - 03-23-2025

Great job! Thanks @DieOfenfrische for the help. Now I got the file and it started working properly. Smile

I attached this file to this message, which I needed. If there are others who need it, you can quickly download it from here, and you don't have to search for it in the depths of the internet.

Here's the code snippet of what this file contains:
Code:
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\ISTA]
"ProductVersion"="4.39.20.24455"
"MainProductVersion"="4.39"
"DataVersion"="4.39.20"
"LogisticBaseVersion"="4.39.20"
"DataVersion_de-DE"="4.39.20"
"DataVersion_en-GB"="4.39.20"
"SWIData"="4.52.31"
"InstallLocation"="C:\\EC-APPS\\ISTA"

[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\Rheingold]
"BMW.Rheingold.Programming.ExpertMode"="True"
"BMW.Rheingold.Programming.Enabled"="True"
"BMW.Rheingold.Programming.PsdzDataPath"="..\\..\\..\\PSdZ\\data_swi"
"BMW.Rheingold.RheingoldSessionController.FASTATransferMode"="None"
"BMW.Rheingold.Diagnostics.VehicleIdent.ReadFASTAData"="False"
"BMW.Rheingold.VehicleIdentification.TypeKeyIdentEnabled"="True"
"BMW.Rheingold.OnlineMode"="False"
"BMW.Rheingold.Diagnostics.EnableRsuProcessHandling"="False"
"BMW.Rheingold.ISTAGUI.Dialogs.AdministrationDialog.ShowPTTSelection"="True"
"BMW.Rheingold.CoreFramework.TRICZentralActive"="False"
"EnableRelevanceFaultCode"="False"
"DebugLevel"="9"

[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMW\ISPI\TRIC\ISTALauncher]
"BMW.TricTools.IstaLauncher.InstallationStatus"="InstallationComplete"


RE: ISTA 4.49.2x and PSdZData 4.52.31 problem - DieOfenfrische - 03-24-2025

tbh, I thought you'd also have to change the MainProductVersion and stuff. But good if it's working for you like this Icon_thumbup