+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: ÎŜ†Ä 4.39.2 Connection problem (/showthread.php?tid=7565)
ÎŜ†Ä 4.39.2 Connection problem - KrzychuL - 05-02-2025
Hello, i have a small problem with connecting to the car by ENET cable with ÎŜ†Ä 4.39.2. in connection manager there isn't my car shows. Before i was using 4.29 i think and i have no problems with it and ėšÝ§ same works good but 4.39 no :/
i have redist:
- 2005, 2008, 2010, 2012, 2013, 2015 - 2019
standard tools 2024.03
i have this ÎŜ†Ä downloaded ÎŜ†Ä
![[Image: Be3yZba.png]](https://i.imgur.com/Be3yZba.png)
and it looks like this
![[Image: UJSCVaD.png]](https://i.imgur.com/UJSCVaD.png)
easy connect normally showing my car. Could somebosy help why this version not work? in ediabas confif i tried ENET and REMOTE and nothing.
RE: ÎŜ†Ä 4.39.2 Connection problem - KrzychuL - 05-03-2025
Problem solved. I need to disable sim network interface and connection shown
RE: ÎŜ†Ä 4.39.2 Connection problem - Monty11 - 05-11-2025
Hello and sorry for my poor English, so I'm writing in German.
I've been using ÎŜ†Ä for many years and would prefer to always use the latest version. I have ÎŜ†Ä installed on three laptops and have the same problem.
All istas up to version 4.39 work for me; all versions after that run very slowly or crash.
Reading control units takes a very long time and eventually crashes. This also applies to the new version 4.52.
I keep trying to read the same vehicle: an F26 with a B47 engine. I haven't tried other BMWs yet.
My question: Has there been any change after version 4.39?
Please help.
Thanks
RE: ÎŜ†Ä 4.39.2 Connection problem - KrzychuL - 06-04-2025
(05-11-2025, 07:50 AM)Monty11 Wrote: Hello and sorry for my poor English, so I'm writing in German.
I've been using ÎŜ†Ä for many years and would prefer to always use the latest version. I have ÎŜ†Ä installed on three laptops and have the same problem.
All istas up to version 4.39 work for me; all versions after that run very slowly or crash.
Reading control units takes a very long time and eventually crashes. This also applies to the new version 4.52.
I keep trying to read the same vehicle: an F26 with a B47 engine. I haven't tried other BMWs yet.
My question: Has there been any change after version 4.39?
Please help.
Thanks
Hello, go into control panel on ethernet adapters page and try disable some cards. If you have wifi or sim in my case try disable it clicking right button on mouse and check.