Clarification....Engine Running?? - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: Clarification....Engine Running?? (/showthread.php?tid=763) |
Clarification....Engine Running?? - Saunders17283 - 10-01-2020 So I've been searching and wanted to get a general consensus since I've seen suggestions both ways... Is this the general consensus when coding via eSys/eSysX? 1. Engine off for VO Coding 2. Engine off for FDL/NCD Coding of DME Modules? 3. Engine can be on for ALL other modules? Does it make a difference if your car is connected to a CTEK MXS 5.0? RE: Clarification....Engine Running?? - DayvG - 10-01-2020 Ignition on, engine off. Power supply connected. That’s it RE: Clarification....Engine Running?? - Saunders17283 - 10-01-2020 (10-01-2020, 04:04 PM)DayvG Wrote: Ignition on, engine off. Power supply connected. 1. How about if you don’t have a power supply (CTEK, etc...)? 2. I’ve run into a situation where when I do “READ ECU” with engine off, I don’t get a full return of all of them in the SVT pane? What causes that? RE: Clarification....Engine Running?? - DayvG - 10-01-2020 (10-01-2020, 04:10 PM)Saunders17283 Wrote:Some ECU’s are terminal 15 ECU’s therefore if the ignition goes off then some ECU’s won’t be visible. KAFAS2 for example is a terminal 15 ECU.(10-01-2020, 04:04 PM)DayvG Wrote: Ignition on, engine off. Power supply connected. (10-01-2020, 04:57 PM)dragosv6 Wrote:Do you mean engine running? Surely the ignition has to be on?(10-01-2020, 04:10 PM)Saunders17283 Wrote:(10-01-2020, 04:04 PM)DayvG Wrote: Ignition on, engine off. Power supply connected. RE: Clarification....Engine Running?? - GileraDNA - 10-02-2020 (10-01-2020, 04:10 PM)Saunders17283 Wrote:with simple charger is to low amps your CTEK have 5-7AMPS. minimum required bmw 50AMPS for coding and diagnostic.(10-01-2020, 04:04 PM)DayvG Wrote: Ignition on, engine off. Power supply connected. For example you can buy expensive like gys flash 100.12 or other solution buy server power supply and made by you self. (just use google how to make power supply many info even here is exist this information) i made my own power supply from server power supply. And already updated i-level of my g30 |