+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: BMW F10 ZGW Flash problem (/showthread.php?tid=9461)
BMW F10 ZGW Flash problem - Alinjdm - 01-06-2026
Hello I have purchased a NBT bench flash cable and I have a ZGW 1 and a ZGW 2 4SK laying around. I have ordered an NBT EVO to retrofit to my personal F20 LCI. While I wait for the new headunit to arive I decided to test and when I wanted to flash the software on the ZGW 1 to a new software version I encountered the following error in ė-šÝ§:
'Generating target SVT with strategy complete flash and integration level "F010-24-11-520" (target) and "F010-10-09-525" (shipment) failed. [C324]
KIS error: Das logistische Teil mit der Sachnummer 9385182 ist nicht bestellbar. [1283]'.
It is my understanding that I have to edit the SVT in order to allow for ė-šÝ§ to skip the FRM for flashing but I am unsure how. Any tips would be highly apreciated as I endeavour to learn.
P.S: I tried the same thing with the ZGW 2 and I get the following error: 'Generating target SVT with strategy complete flash and integration level "F010-24-11-520" (target) and "F010-13-03-502" (shipment) failed. [C324]
KIS error: Das logistische Teil mit der Sachnummer 9385182 ist nicht bestellbar. [1283]'
Thanks!
RE: BMW F10 ZGW Flash problem - Stratofortress - 01-06-2026
FRM is required for your setup.
RE: BMW F10 ZGW Flash problem - Alinjdm - 01-06-2026
(01-06-2026, 08:13 PM)Stratofortress Wrote: FRM is required for your setup.
So I need to have an frm connected to the setup as well?
RE: BMW F10 ZGW Flash problem - Stratofortress - 01-06-2026
Unless modifying the FRM in SVT to allow calculation of SVT SOLL will not resolve your issue. FRM must remain in the SVT.
RE: BMW F10 ZGW Flash problem - Alinjdm - 01-06-2026
(01-06-2026, 09:32 PM)Stratofortress Wrote: Unless modifying the FRM in SVT to allow calculation of SVT SOLL will not resolve your issue. FRM must remain in the SVT.
Could you tell me how and what I should modify, I searched for quite some time but came up a bit empty handed.
Thanks!
RE: BMW F10 ZGW Flash problem - Stratofortress - 01-06-2026
Start by experimenting with other integration level for shipment.
RE: BMW F10 ZGW Flash problem - Alinjdm - 01-06-2026
(01-06-2026, 09:55 PM)Stratofortress Wrote: Start by experimenting with other integration level for shipment.
Ok, will do and see what's what.