BMW F10 ZGW Flash problem

[Alinjdm]

Hello I have purchased a NBT bench flash cable and I have a ZGW 1 and a ZGW 2 4SK laying around. I have ordered an NBT EVO to retrofit to my personal F20 LCI. While I wait for the new headunit to arive I decided to test and when I wanted to flash the software on the ZGW 1 to a new software version I encountered the following error in E-Sys:

'Generating target SVT with strategy complete flash and integration level "F010-24-11-520" (target) and "F010-10-09-525" (shipment) failed. [C324]
KIS error: Das logistische Teil mit der Sachnummer 9385182 ist nicht bestellbar. [1283]'.

It is my understanding that I have to edit the SVT in order to allow for E-Sys to skip the FRM for flashing but I am unsure how. Any tips would be highly apreciated as I endeavour to learn.

P.S: I tried the same thing with the ZGW 2 and I get the following error: 'Generating target SVT with strategy complete flash and integration level "F010-24-11-520" (target) and "F010-13-03-502" (shipment) failed. [C324]
KIS error: Das logistische Teil mit der Sachnummer 9385182 ist nicht bestellbar. [1283]'

Thanks!

[Stratofortress]

FRM is required for your setup.

[Alinjdm]

FRM is required for your setup.

So I need to have an frm connected to the setup as well?

[Stratofortress]

Unless modifying the FRM in SVT to allow calculation of SVT SOLL will not resolve your issue. FRM must remain in the SVT.

[Alinjdm]

Unless modifying the FRM in SVT to allow calculation of SVT SOLL will not resolve your issue. FRM must remain in the SVT.

Could you tell me how and what I should modify, I searched for quite some time but came up a bit empty handed.

Thanks!

[Stratofortress]

Start by experimenting with other integration level for shipment.

[Alinjdm]

Start by experimenting with other integration level for shipment.

Ok, will do and see what's what.