+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: ISTA+ 4.56.30 with ENET Cable (/showthread.php?tid=9516)
ISTA+ 4.56.30 with ENET Cable - Simoan - 03-07-2026
Hi everyone, maybe I'm a bit slow on the uptake
, but I need your help: I have the following setup: ISTA 4.56.30 with 4.56.35 programming data. I can read diagnostic data and the current voltage at the devices, i can programm ECUs, but I can't write service data because ISTA isn't detecting the voltage at terminals KL15 and KL30 via the enetcable. Is there a solution or workaround to fix this problem without having to buy an ICOM?In older versions, you could disable voltage control via registry entries or a power supply software tool.
Need your help, please!