+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: From Random Dead Battery To No Instrument Cluster and No Audio from Comnad (/showthread.php?tid=9633)
From Random Dead Battery To No Instrument Cluster and No Audio from Comnad - Islandbread - 08-10-2026
2020 X6 xDrive40i (G06) — KOMBI blank/dead, ÎŜ†Ä+ shows responding, no display
VIN-confirmed via ÎŜ†Ä+ 4.56.30 over ENET, direct connection, no issues. DKOMBI shows up in control unit tree as present, not flagged "not responding," not in fault/abort state per the legend.
Ran "Call up ECU" on KOMBI directly — comes back "responding properly." So it's alive on the bus (K-CAN), just not driving the physical display.
Found and ran Delete Transport Mode / ABL FUB service function — completed with no errors. Cycled ignition off/on after. Still no display output.
Currently re-running ECU test to check fault memory post-cycle.
Since KOMBI communicates fine but shows nothing, is this more likely a display backlight/power circuit fault (not fixable via ÎŜ†Ä) vs. a coding mismatch needing reprogram? Has anyone seen transport mode deletion not resolve a dark cluster on G06 platform? Next step would be full target-vs-actual programming comparison if fault memory comes back clean — wanted to check if others have hit this exact symptom first.