+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: remote access ÎŜ†Ä via vpn (/showthread.php?tid=9647)
remote access ÎŜ†Ä via vpn - BmwKofas - 08-28-2026
hello i am new here , can someone with the knowledge help me to setup a vpn ÎŜ†Ä connection for remote diagnose, i have enet and ÏçØɱ , i downloaded radmin vpn both pc , made server ping all good , just cant find the enet in the pc with the ÎŜ†Ä . would anyone be kind to help me setup a proper connection ?
RE: remote access ÎŜ†Ä via vpn - JSC - 08-28-2026
You must copy client IP to EasyConnect > select ÏçØɱ lock and apply. Then you can use ÎŜ†Ä remote.
RE: remote access ÎŜ†Ä via vpn - BmwKofas - 08-28-2026
first of all thank you very much , so i have to copy the client radmin ip to easy connect, and use ÎŜ†Ä normal ? or i have to change stuff in ediabas ?i saw somehting about port interface and something else in tcp. and should i lock the ip with easy connect. i enter ÎŜ†Ä with local network or though ediabas ( in vehicle interface )??
RE: remote access ÎŜ†Ä via vpn - JSC - 08-28-2026
(08-28-2026, 08:31 AM)BmwKofas Wrote: first of all thank you very much , so i have to copy the client radmin ip to easy connect, and use ÎŜ†Ä normal ? or i have to change stuff in ediabas ?i saw somehting about port interface and something else in tcp. and should i lock the ip with easy connect. i enter ÎŜ†Ä with local network or though ediabas ( in vehicle interface )??to connect with enet on F, G,I series look fotos.
1. Open radmin on both pcs
2. Open remote tool on both pcs and click start
3. copy IP client from radmin to easyconnect > do check ( like foto)
4. open ÎŜ†Ä and for enet put like foto
5. connect thats all
good luck
RE: remote access ÎŜ†Ä via vpn - BmwKofas - 08-28-2026
(08-28-2026, 09:48 AM)JSC Wrote:well try that still cant connect easy connect to radmins ip . i have ping both sides. anyway i am at contact with a friend who is pc programmer , hopefully he ll figure out my mistakes. if i succeded i ll inform for the results thank you in advance(08-28-2026, 08:31 AM)BmwKofas Wrote: first of all thank you very much , so i have to copy the client radmin ip to easy connect, and use ÎŜ†Ä normal ? or i have to change stuff in ediabas ?i saw somehting about port interface and something else in tcp. and should i lock the ip with easy connect. i enter ÎŜ†Ä with local network or though ediabas ( in vehicle interface )??to connect with enet on F, G,I series look fotos.
1. Open radmin on both pcs
2. Open remote tool on both pcs and click start
3. copy IP client from radmin to easyconnect > do check ( like foto)
4. open ÎŜ†Ä and for enet put like foto
5. connect thats all
good luck
RE: remote access ÎŜ†Ä via vpn - JSC - 08-28-2026
(08-28-2026, 12:44 PM)BmwKofas Wrote:Then you must do something wrong. I use it every day with ė-šÝ§ and ÎŜ†Ä remote and works 100%. Did you change EDIABAS.conf to ENET?(08-28-2026, 09:48 AM)JSC Wrote:well try that still cant connect easy connect to radmins ip . i have ping both sides. anyway i am at contact with a friend who is pc programmer , hopefully he ll figure out my mistakes. if i succeded i ll inform for the results thank you in advance(08-28-2026, 08:31 AM)BmwKofas Wrote: first of all thank you very much , so i have to copy the client radmin ip to easy connect, and use ÎŜ†Ä normal ? or i have to change stuff in ediabas ?i saw somehting about port interface and something else in tcp. and should i lock the ip with easy connect. i enter ÎŜ†Ä with local network or though ediabas ( in vehicle interface )??to connect with enet on F, G,I series look fotos.
1. Open radmin on both pcs
2. Open remote tool on both pcs and click start
3. copy IP client from radmin to easyconnect > do check ( like foto)
4. open ÎŜ†Ä and for enet put like foto
5. connect thats all
good luck