remote access ista via vpn

[BmwKofas]

hello i am new here , can someone with the knowledge help me to setup a vpn ista connection for remote diagnose, i have enet and icom , i downloaded radmin vpn both pc , made server ping all good , just cant find the enet in the pc with the ista . would anyone be kind to help me setup a proper connection ?

[JSC]

You must copy client IP to EasyConnect > select icom lock and apply. Then you can use ista remote.

[BmwKofas]

first of all thank you very much , so i have to copy the client radmin ip to easy connect, and use ista normal ? or i have to change stuff in ediabas ?i saw somehting about port interface and something else in tcp. and should i lock the ip with easy connect. i enter ista with local network or though ediabas ( in vehicle interface )??

[JSC]

first of all thank you very much , so i have to copy the client radmin ip to easy connect, and use ista normal ? or i have to change stuff in ediabas ?i saw somehting about port interface and something else in tcp. and should i lock the ip with easy connect. i enter ista with local network or though ediabas ( in vehicle interface )??

to connect with enet on F, G,I series look fotos.

1. Open radmin on both pcs
2. Open remote tool on both pcs and click start
3. copy IP client from radmin to easyconnect > do check ( like foto)
4. open ista and for enet put like foto
5. connect thats all
good luck

[BmwKofas]

first of all thank you very much , so i have to copy the client radmin ip to easy connect, and use ista normal ? or i have to change stuff in ediabas ?i saw somehting about port interface and something else in tcp. and should i lock the ip with easy connect. i enter ista with local network or though ediabas ( in vehicle interface )??

to connect with enet on F, G,I series look fotos.

1. Open radmin on both pcs
2. Open remote tool on both pcs and click start
3. copy IP client from radmin to easyconnect > do check ( like foto)
4. open ista and for enet put like foto
5. connect thats all
good luck

well try that still cant connect easy connect to radmins ip . i have ping both sides. anyway i am at contact with a friend who is pc programmer , hopefully he ll figure out my mistakes. if i succeded i ll inform for the results thank you in advance

[JSC]

first of all thank you very much , so i have to copy the client radmin ip to easy connect, and use ista normal ? or i have to change stuff in ediabas ?i saw somehting about port interface and something else in tcp. and should i lock the ip with easy connect. i enter ista with local network or though ediabas ( in vehicle interface )??

to connect with enet on F, G,I series look fotos.

1. Open radmin on both pcs
2. Open remote tool on both pcs and click start
3. copy IP client from radmin to easyconnect > do check ( like foto)
4. open ista and for enet put like foto
5. connect thats all
good luck

well try that still cant connect easy connect to radmins ip . i have ping both sides. anyway i am at contact with a friend who is pc programmer , hopefully he ll figure out my mistakes. if i succeded i ll inform for the results thank you in advance

Then you must do something wrong. I use it every day with E-sys and Ista remote and works 100%. Did you change EDIABAS.conf to ENET?