G01 LCI tail lamps coding problem

[okay]

Hello Guys

I'm a newbie here and most probably this one will be simple for You.

Here is the problem.

I have G01 LCI from canada imported to europe.
Tail lights has been upgraded, and now they have amber turn led's installed in all 4 lamps + external lamps have additional pins added.
Two cables from BDC to external lamps were added.

When lamps are connected without any coding, external (fender) stop light is blinking and internal (tailgate) amber.

For coding I'm using Esys 3.30.1  TokenMaster's 2.8.1.155 and BimmerUtility.

In the Interner I found info that to make tail lights work only two params needs to be changed:
3706 LicLogLamp2PhysLampIndex G01_US_code1 -> G01_ECE_code1
3707 LicLOgLamp2PhysLampData G01_US_code1 -> G01_ECE_code1

Using BimmerUtility I made change in the 5665 ncd and coded the car.

As the effect, stop lamp is not blinking, external amber are blinking fast, and internal abmer are not blinking.

I tried many different options in params metioned above and many others but I'm not able to code the lamps correctly - the effect is always the same, external lamps blinking quickly, and internal lamps not blinking at all.

Are You able to help me and tell me what I'm doing wrong?

Thanks a lot,
Kris

[Oleg Shady]

Hello Guys

I'm a newbie here and most probably this one will be simple for You.

Here is the problem.

I have G01 LCI from canada imported to europe.
Tail lights has been upgraded, and now they have amber turn led's installed in all 4 lamps + external lamps have additional pins added.
Two cables from BDC to external lamps were added.

When lamps are connected without any coding, external (fender) stop light is blinking and internal (tailgate) amber.

For coding I'm using Esys 3.30.1 TokenMaster's 2.8.1.155 and BimmerUtility.

In the Interner I found info that to make tail lights work only two params needs to be changed:
3706 LicLogLamp2PhysLampIndex G01_US_code1 -> G01_ECE_code1
3707 LicLOgLamp2PhysLampData G01_US_code1 -> G01_ECE_code1

Using BimmerUtility I made change in the 5665 ncd and coded the car.

As the effect, stop lamp is not blinking, external amber are blinking fast, and internal abmer are not blinking.

I tried many different options in params metioned above and many others but I'm not able to code the lamps correctly - the effect is always the same, external lamps blinking quickly, and internal lamps not blinking at all.

Are You able to help me and tell me what I'm doing wrong?

Thanks a lot,
Kris

Hello Kris

Did you solve the problem? I have the same issue, the internal blinkers doesn't work. Coding doesn't help