Hi Guys, thought I might update you all since maybe other members are going to be interested.
So I bought the Cartain DR700BMW DAB+ module and installed it in my E60 5Series (2004).
https://www.cartain.de/index.php/en/prod...-player-en
I have a MASK Navigation Business in my car (yep, the one with only arrow navigation).
Recently I already installed the AUX input by installing the hardware cable to the MASK system connector and VO coded via NCS Expert, the +NAUX to my car and activated the AUX by coding in the MASK module. So I had some experience.
VO: (F1-F3-E60 --> F2-E60-ADD "+NAUX" -OK-F6 --> F4-CAS --> F2-FA WRITE --> F3 --> F6)
Coding: (F1-F3-E60-F6 --> F4-MASK --> F2-Codierdaten Lesen --> F3 -->
NCS_dummy .... TRC file... AUX: nicht activ change to activ .... Export MAN file --> F2-SG Codieren --> F3 --> F6)
Cable itself I bought on Amazon.de
--> All working like a charm.
--> Tip: do check where to mount the connector, since depending on your E60series and Navigation computer, the position might be different, even compared to some youtube tutorials
!
Next up was the DAB+ installation.
VO: adding $654 (same as above for +NAUX) to MASK
Coding: same as above, activate digital radio
Parts I needed:
1 x MOST Y-cable going from 1 connection (to Mulf) to 2 connections (to MULF and move on to the DAB+ Module). The final MOST plug needs the power supply as well for the DAB+ module, so I ordered it here (since MOST cable does NOT come with the Cartain module):
https://shop.elektronikidee.de/en/product-65.html
1 x Cartain DR700BMW (it comes with a DAB+ antenna, so I installed this one and routed the cable by the speaker under the rear shelf to the side pillar)
Took me about 1,5h: Coding and Installing.
Remark:
A special leaflet of Cartain added to the package said there was also a possibility to "auto code" the VO needed by the cartain module itself....
I only saw it later, so can't say if it worked.
However, I have no reason to believe it does not.
All is up and running fine!!