Hello guys,
I am upgrading my car with swapping hu_entry to hu_nbt. What I did was
In the bottom, add 609 and change 6NH to 6NS. Click apply. Calculate FP again. Save.
Go to Expert Mode >> VCM >> Load the saved FA file in the bottom section, file tab >> Right-click FA and Calculate FP >> Go to VCM Master tab >> write FA FP.
However , when I try to do VO code for HU_NBT and Kombi as those steps bellow
Expert Mode >> Coding >> Read FA (VO) >> Activate FA (VO) >> Read SVT (VCM) >> Left-Click on HU_NBT >> "Detect CAF for SWE" >> Select the latest CAFD displayed >> OK >> Right-Click on HU_NBT (the ECU itself not the underlying CAFD) => CODE
The Detect CAF for SWE is greyed out!! I'm using esys 3.27.1 with 4.43 pdz lite.
Any info would be appreciated. Thanks.
################################UPDATED##############
UPDATE:
The 3.30 works for me. Thank you guys. However, it still showed BKOMBI not KOMBI. The bluetooth streaming music from phone and aux connected using usb isn't working.
Thanks.
I am upgrading my car with swapping hu_entry to hu_nbt. What I did was
In the bottom, add 609 and change 6NH to 6NS. Click apply. Calculate FP again. Save.
Go to Expert Mode >> VCM >> Load the saved FA file in the bottom section, file tab >> Right-click FA and Calculate FP >> Go to VCM Master tab >> write FA FP.
However , when I try to do VO code for HU_NBT and Kombi as those steps bellow
Expert Mode >> Coding >> Read FA (VO) >> Activate FA (VO) >> Read SVT (VCM) >> Left-Click on HU_NBT >> "Detect CAF for SWE" >> Select the latest CAFD displayed >> OK >> Right-Click on HU_NBT (the ECU itself not the underlying CAFD) => CODE
The Detect CAF for SWE is greyed out!! I'm using esys 3.27.1 with 4.43 pdz lite.
Any info would be appreciated. Thanks.
################################UPDATED##############
UPDATE:
The 3.30 works for me. Thank you guys. However, it still showed BKOMBI not KOMBI. The bluetooth streaming music from phone and aux connected using usb isn't working.
Thanks.