09-29-2024, 02:32 PM
(This post was last modified: 09-29-2024, 02:33 PM by the_punisher42.)
Hello everyone,
I am currently experiencing an xdrive problem on my e61.
I was entitled to the famous faults 5461 (VTG: Servomotor activation fault) and 5F3A (DSC: Transfer case: malfunction) which led me to replace the transfer case actuator. It turns out that this was probably not the cause of my problem since the worm screw in the old actuator is in good condition (replaced 3 years ago by the previous owner). After replacement, I tried to do a calibration with ISTA which always ends in a communication fault.
I now have fault 54C4 (VTG: faulty calibration)
What do you think?
Thank you for reading me
I am currently experiencing an xdrive problem on my e61.
I was entitled to the famous faults 5461 (VTG: Servomotor activation fault) and 5F3A (DSC: Transfer case: malfunction) which led me to replace the transfer case actuator. It turns out that this was probably not the cause of my problem since the worm screw in the old actuator is in good condition (replaced 3 years ago by the previous owner). After replacement, I tried to do a calibration with ISTA which always ends in a communication fault.
I now have fault 54C4 (VTG: faulty calibration)
What do you think?
Thank you for reading me
![[-]](https://www.bimmerscene.com/images/collapse.png)