FAULT CODE 1F2108

[ICON-AUTOMOTIVE]

Can someone help me with this fault code?

BMW M2 n55 was tuned. tried writing back to stock.

But failed because i cannot erase or write the bootloader.

now i have following fault code: 1f2108

tried force writing btld with esys but it does not want to write dme

so now i have a mismatch powerclass in fem and dme

suggestions?

[ek1978]

share a screenshot of your TAL .

[ICON-AUTOMOTIVE]

share a screenshot of your TAL .

Code:

<> 
Read SVT before TAL execution started.
TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated.
<run()-> Value of 'httpServerActivation': true>
<run()-> Value of 'isDeactivateHttp': false>
<ExecutionID=2025/07/07-19:36:31.056>
<[] prepareTALExecution started [PROGRESS]>
<[] prepareTALExecution finished [PROGRESS]>
<[] prepareVehicleForFlash started [PROGRESS]>
<[] prepareVehicleForFlash finished [PROGRESS]>
<[DME2 - 12] prepareECUforBLUpdate started [PROGRESS]>
<[DME2 - 12] prepareECUforBLUpdate finished [PROGRESS]>
<[DME2 - 12] authenticateECUforBLUpdate started [PROGRESS]>
<[DME2 - 12] authenticateECUforBLUpdate finished [PROGRESS]>
<[DME2 - 12 - btld_000019dc-001_079_001] Transaction type: blFlash;  Message: TA started [TRANSACTION]>
<[DME2 - 12] performECUBLUpdate started with protocol UDS [PROGRESS]>
<MCDDiagService<id=56634, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RC_EM_IE - RoutineControl EraseMemory IndicatedErasing, description=error: negative response : conditionsNotCorrect, link=DME2_12_ETHERNET> [DIAGSERVICE]>
<[DME2 - 12 - btld_000019dc-001_079_001] Transaction type: blFlash;  Message: 0% progress on ECUId:DME2_0x12 [0% of btld_000019dc-001_079_001] [TRANSACTION]>
<[DME2 - 12] performECUBLUpdate finished with protocol UDS [PROGRESS]>
<[] job failed with negative response error:
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code conditionsNotCorrect; LinkName: DME2_12_ETHERNET
 severity: ERROR
 [THROWABLE]>
<[DME2 - 12 - btld_000019dc-001_079_001] Transaction type: blFlash;  Message: TA finished [TRANSACTION]>
<[DME2 - 12] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error:
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code conditionsNotCorrect; LinkName: DME2_12_ETHERNET
 severity: ERROR
 [WARN]>
<[DME2 - 12] - [Exception - DME2 - 12] job failed with negative response error:
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code conditionsNotCorrect; LinkName: DME2_12_ETHERNET
 severity: ERROR
>
<[DME2 - 12] prepareECUforBLUpdate started [PROGRESS]>
<MCDDiagService<id=230634, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforBLUpdate, service=DSC - DiagnosticSessionControl, description=error: negative response : conditionsNotCorrect, link=DME2_12_ETHERNET> [DIAGSERVICE]>
<MCDDiagService<id=64634, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforBLUpdate, service=RC_DAFM_AFM - RoutineControl ActivateFlashMode, description=error: negative response : conditionsNotCorrect, link=DME2_12_ETHERNET> [DIAGSERVICE]>
<MCDDiagService<id=38649, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforBLUpdate, service=RC_CPPC - RoutineControl CheckProgrammingPreCondition, description=error: negative response : requestOutOfRange, link=DME2_12_ETHERNET> [DIAGSERVICE]>
<MCDDiagService<id=34617, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforBLUpdate, service=CDTCS - ControlDTCSetting, description=error: negative response : serviceNotSupported, link=DME2_12_ETHERNET> [DIAGSERVICE]>
<MCDDiagService<id=230634, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforBLUpdate, service=DSC - DiagnosticSessionControl, description=error: negative response : conditionsNotCorrect, link=DME2_12_ETHERNET> [DIAGSERVICE]>
<[DME2 - 12] prepareECUforBLUpdate finished [PROGRESS]>
<[DME2 - 12] authenticateECUforBLUpdate started [PROGRESS]>
<[DME2 - 12] authenticateECUforBLUpdate finished [PROGRESS]>
<[DME2 - 12 - btld_000019dc-001_079_001] Transaction type: blFlash;  Message: TA started [TRANSACTION]>
<[DME2 - 12] performECUBLUpdate started with protocol UDS [PROGRESS]>
<MCDDiagService<id=276649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RDBI_RMA - ReadDataByIdentifier ReadMemoryAddress, description=error: negative response : requestOutOfRange, link=DME2_12_ETHERNET> [DIAGSERVICE]>
<MCDDiagService<id=56634, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RC_EM_IE - RoutineControl EraseMemory IndicatedErasing, description=error: negative response : conditionsNotCorrect, link=DME2_12_ETHERNET> [DIAGSERVICE]>
<[DME2 - 12 - btld_000019dc-001_079_001] Transaction type: blFlash;  Message: 0% progress on ECUId:DME2_0x12 [0% of btld_000019dc-001_079_001] [TRANSACTION]>
<[DME2 - 12] performECUBLUpdate finished with protocol UDS [PROGRESS]>
<[] job failed with negative response error:
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code conditionsNotCorrect; LinkName: DME2_12_ETHERNET
 severity: ERROR
 [THROWABLE]>
<[DME2 - 12 - btld_000019dc-001_079_001] Transaction type: blFlash;  Message: TA finished [TRANSACTION]>
<[DME2 - 12] There was an error during TAL execution, please check the log files. [WARN]>
<[DME2 - 12] - [Exception - DME2 - 12] job failed with negative response error:
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code conditionsNotCorrect; LinkName: DME2_12_ETHERNET
 severity: ERROR
>
<[DME2 - 12] installECUBL started [PROGRESS]>
<[DME2 - 12] installECUBL finished [PROGRESS]>
<[DME2 - 12] finalizeECUBLUpdate started [PROGRESS]>
<[DME2 - 12] finalizeECUBLUpdate finished [PROGRESS]>
<[] There was an error, please check the log files. [WARN]>
<[] - [Exception - DME2 - 12] job failed with negative response error:
 code: repeat job
 description: Service RC_EM_IE returned a negative response with response code conditionsNotCorrect; LinkName: DME2_12_ETHERNET
 severity: ERROR
>
<[] finalizeVehicleFlash started [PROGRESS]>
<[] finalizeVehicleFlash finished [PROGRESS]>
<[] finalizeTALExecution started [PROGRESS]>
<[] finalizeTALExecution finished [PROGRESS]>
<TAL execution finished [TAL_EXECUTION_FINISHED]>
TAL-Execution finished with status: "FinishedWithError".
TAL execution finished. Duration: "59s".
<>
Read SVT after TAL execution started.
Read SVT after TAL execution finished.

[ek1978]

that is a tal proccessing log , not a screenshot .

But from the log , I have a feeling that you are trying to flash the DME with an older software than the software installed on the dme now .

which version of PSDZDATA do you have ?