BMW g31 ; 2018 year ; ACC retrofited - Coding needed ?

[Sschraube1]

Hello together,

i retrofited an acc sensor and a new steering wheel ; with ista it tells that my wiring is ok and i habe communication with acc / power is there too.
i wanted to integrate acc with ista , but i doesnt work.


Do i have to code first the vo for acc or i only have to integrate the acc on ista ?
If i have to code, which vo is that ? and which modules ? SAS/ instrument cluster ?


Do i need to code headunit ? (I have carplay)


sorry for so much questions   ; i code so rare, also only my car so i dont know everything



and thanks in advance

[TheNine90]

For this retrofit you better use esys. You can calculate svt using modified VO and check which modules are required for this retrofit

[Sschraube1]

For this retrofit you better use esys. You can calculate svt using modified VO and check which modules are required for this retrofit

But which code is for acc?

I know how to change vo and write new vo, but I don't know the code is for acc

[TheNine90]

5DF ACTIVE_CRUISE_CONTROL_STOP_GO

[Sschraube1]

Hello together, 

It works
Thanks 

I coded 5df on dkombi/sas/dsc.

Ntb I haven't touched


I write it here back, for maybe other ppl that want to upgrade ACC.