Extended cluster

[adelin731]

Hi guys, is me again. I have successfully coded the HU from eBay which is HU_CHAMP2 not HU_NBT.
Anyway, after this I have tried to code the extended cluster, I have added 6WA to FA but now KOMBI doesn't show up anymore.
Am I doing something wrong?
Thanks in advance!

[TheNine90]

Try this, FDL code below items in HU first.
1.EXTERNER_MOST --> aktiv
2.EXTERNE_MOST_DIAG --> aktiv
3.KOMBI_CIC --> kombi_High
Then read ECU.

If it doesnt show up try delete bkombi from svt and write it back. let the car sleep for a bit and try reading ecu's.

[adelin731]

Try this, FDL code below items in HU first.
1.EXTERNER_MOST --> aktiv
2.EXTERNE_MOST_DIAG --> aktiv
3.KOMBI_CIC --> kombi_High
Then read ECU.

If it doesnt show up try delete bkombi from svt and write it back. let the car sleep for a bit and try reading ecu's.

I did all the 3 steps of the FDL code in the HU.
I have tried to delete the KOMBI from svt but same thing.
I let it sleep for 40 minutes and same result.
Would you like to try remote code for me? This way you can see exactly what is going on.
Thank you.

[TheNine90]

pm me i can help you remotely