F11 535d 2011 sport display coding

[WroBMW]

Hi everyone,

I have already coded some minor things . I have few questions to be sure for my next try. 
I want to code sports display with HP and torque, I have esys but do I need launcher for that?
I would also like to code out start-stop button to be always off.

what SW do I need for that ? esys or esys launcher premium ? 

Can some one shed some light and point me towards the correct software?
I want to do it myself. I want to learn it.
thanx

[ek1978]

you just need esys Launcher , or Bimmercode on smartphone .

F1x is a very tricky Series , there is no guaranty that even if you managed to enable Sport Display , there is a big chance that it wont work.

But are you sure that it is not enabled by default from factory ? , I had 535i once and it was enabled from factory.

[WroBMW]

thanx for your answer. I have esys, but can you provide link in PM where can I download working Esys Launcher?
Probably it is enabled but i cannot select it. I saw on youtube people have in sport settings an option to select sport display and see two dials with HP and Torque.
that is what I want. Also I want to code start-stop button to memorise last position.

[Rob]

BimmerUtility.com

[Dafoff]

CRACKED bimmercode here

:
Bimmercode 4.25.4 unlocked.apk
https://disk.yandex.ru/d/gSIpwUWRpgo_ow

I not use this a long time
You can Check work or not

Work with Vlinker FD / FD+

[WroBMW]

Hi guys,
thanx for your inputs. I have installed E-Sys 3.27.1 with E-Sys Launcher PRO 2.8.1. it works.
I will try to code my sports display with this. Do you guys have any suggestions on this?

Thank you,

[Audioplatinum]

Hi, 

I can help you with this.. 

Here you have parameters inside document, all what you need with Esys. 

Regards,
Damir


  BMW Coding Parameters - F10 - For 5 and 6 series V3.pdf (Size: 54.18 KB / Downloads: 14)

[Audioplatinum]

Hi everyone,

I have already coded some minor things . I have few questions to be sure for my next try. 
I want to code sports display with HP and torque, I have esys but do I need launcher for that?
I would also like to code out start-stop button to be always off.

what SW do I need for that ? esys or esys launcher premium ? 

Can some one shed some light and point me towards the correct software?
I want to do it myself. I want to learn it.
thanx

Also, here is link with all coding...

Take it and save it

link