06-25-2021, 05:47 PM
(This post was last modified: 06-25-2021, 06:40 PM by psycholander.)
I just did an FW flash for a Mini F54 with i-step shipment level F056-17-03-506
Only flashed the NTB2 headunit to get full screen CarPlay. before the flash the version was NBTEVO_K and after the flash NBTEVO_U (wich took 60min to complete but no errors)
For the flash i used Esys 3.36.2 and PSDZdata: V4.29.2.22 and used ilevel target F56-21-03-552
But it turns out that the head unit had updated to 2020-3 and that does not allow CarPlay full sreen.
I double checked if the FW was correctly updated and with an TAL Calculation everything is black and blue on the NBT2.
(see attachment for the check)
Does anyone know why this is? and how to be fixed?
Only flashed the NTB2 headunit to get full screen CarPlay. before the flash the version was NBTEVO_K and after the flash NBTEVO_U (wich took 60min to complete but no errors)
For the flash i used Esys 3.36.2 and PSDZdata: V4.29.2.22 and used ilevel target F56-21-03-552
But it turns out that the head unit had updated to 2020-3 and that does not allow CarPlay full sreen.
I double checked if the FW was correctly updated and with an TAL Calculation everything is black and blue on the NBT2.
(see attachment for the check)
Does anyone know why this is? and how to be fixed?