BMW G20 Homelink retrofit

[Alexandru.k_24]

Hello,
I've just retrofitted the homelink(garage door opener) interior mirror to my BMW G20. Even though the retrofit kit mentions that everything is plug and play and no coding is needed, two faults were left after installation. Everything works perfectly except that these two faults are not cleared, neither with ISTA or any other program (Bimmerlink or other mobile apps). Can someone help me with the necessary coding to get rid of these two errors? This is the mirror that I've used 51162472237.
Thanks a lot.
   

[scutar]

Add 319 to your VA and code BDC

[ek1978]

This retrofit is not " plug and play / no coding required " .

as scutar said , you need to add 319 to your car's FA , then code BDC .

[Alexandru.k_24]

This retrofit is not " plug and play / no coding required " .

as scutar said , you need to add 319 to your car's FA , then code BDC .

Hi! Even after adding 319 to FA and code BDC with the modifed FA, the faults cannot be cleared. Selecting the FF value for PF_INMI_LIN_VAR did the trick, and the fault disappeared!