18-03 NBT EVO Psdzdata

[unixtom]

Hello. I am now facing the problem is my NBTEvo Hu "No Signal" displayed after Programing all ECUs with ISTA, Fan at HU run full speed and try to inject the DVD to check it still working and it take it but can not to reject the DVD.
No ECU show at SVT_ist tree. In Ista it show the ECU is red label and need to replaced before programming.
Please some one can help me bring it back to life and I can PAY FOR YOUR HELP. Thank you.

I think you have destroyed the bootloader.
If E-Sys cannot read the control unit, it will not start.
The bootloader needs to be reflashed with special hardware.

---

Thanks! This is all the data required to flash ID4 to ID6?

yes thats all you need for id4 - id6, no other data is there.

Thanks! To clarify, I will just need the psdzdata in the folder correct? I can ignore the rest?

Did you receive a response?


I also want to flash from id4 to id6 , but I don’t know how.

[seato1137]

Hello. I am now facing the problem is my NBTEvo Hu "No Signal" displayed after Programing all ECUs with ISTA, Fan at HU run full speed and try to inject the DVD to check it still working and it take it but can not to reject the DVD.
No ECU show at SVT_ist tree. In Ista it show the ECU is red label and need to replaced before programming.
Please some one can help me bring it back to life and I can PAY FOR YOUR HELP. Thank you.

I think you have destroyed the bootloader.
If E-Sys cannot read the control unit, it will not start.
The bootloader needs to be reflashed with special hardware.

---

Thanks! This is all the data required to flash ID4 to ID6?

yes thats all you need for id4 - id6, no other data is there.

Thanks! To clarify, I will just need the psdzdata in the folder correct? I can ignore the rest?

Did you receive a response?


I also want to flash from id4 to id6 , but I don’t know how.

Hi. can you tell me what the sw or hw can repair it. just for future because now I have to buy used one from ebay and plan to set it up.

[r3derater]

thank you for psdzdata!

[unixtom]

If your Bootloader ist broken you must flash the EEpromChip with special Hardware.

EEPROM:
https://www.youtube.com/watch?v=uFTEtXV0F3U

Hi. can you tell me what the sw or hw can repair it. just for future because now I have to buy used one from ebay and plan to set it up.

[Ohmyo]

thanks

[trpevskid]

Thanks

[mister]

Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Sterling86]

Thanks

[jamieGlen]

thank you sir

[NKzator]

Thanks!