ISTA+ Standalone 4.56.30 en-GB *LATEST*

[Utzeman]

I will give it a try. Thank you very much.

[atziatzioulis]

STOP!!! Read the Forum's Updated Rules now:  CLICK HERE

-------------------------------------------------------

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

Here is ISTA+ Standalone 4.56.30 built with ISTA-Patcher, ready to use for diagnosis.

The installer install all prerequisite when/if needed.

Features enabled are :
- Disable Fake FSC Reject
- ENET Programming Enabled
- Re-activated ICOM A1/A2
- Works with DCAN on port COM3 (Prerequisite : baudrate 115200 / latency 1ms) (shorcut on desktop to switch)
- Fix rescan old DS2 vehicles
- bypass ignition detection with DCAN/Ediabas (click cancel and it continues)
- Motorbike ignition detection disable with ENET (Erase error memory works with ENET)
- Disabled FASTA (Data Not Send)
- Programming works


This release comes as an installer all-in-one.
It installs everything like genuine BMW installer does.
No need to manually extract / run reg / create desktop shortcuts...

So it does not install in "C:\EC-APPS" (or anywere you wanted), but in "C:\Program Files\BMW\ISPI\TRIC\ISTA". (and other genuine BMW folders...)
So NO you won't be able to install if if you don't have enough space on your disk C:.

You CAN'T install it if ilean release is installed anymore (in case you usually did).

If you don't like this, feel free to build your own or wait for someone else to release another version.

You probably WILL have issues if you have standard tools installed *. So don't whine about ENET/ICOM not working or very long/slow scan (all modules shown red, etc...) if you have any other Ediabas installed on your computer...

Don't ask for help about this.

If you need programming, you will need to download and add SDP/psdzdata full yourself :
[link yet to be added once available]

Extract to:

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

You will find attached REG file to enable programming once/if you copied SDP yourself.

The installer needs a password, it is also available here (see below). Don't PM me !

The install process can be quite long, especially if you have an antivirus like Windows Defenter anti-malware. I suggest you to disable it to install it faster.

The ISTAGUI.exe has been obfuscated to protect it, it may trigger a false positive on your Antivirus, you will need to whitelist it.

Please don't ask here for your missing preferred language file. Wrong place to ask it for! ONLY En-GB file here!

* unless you really know what you are doing...

NO PERSONAL SUPPORT BY PM. I DON'T HAVE ANY OTHER LANGUAGE TO SHARE.
Any PM regarding this topic will be ignored.


P.S : If you had an earlier release, you have to UNINSTALL it first.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

---

Thanks

[Armen]

Hey rob I sent a new donation for reactivation becuase my hard drive died and had to reinstall windows heres my new hwid 04126D6-5CD4E4C-FC2693E-4D66726 thanks!!!

[emregozukara]

Hi Rob, thanks for sharing
Here's my hardware id
AD6E6D6-5795470-4A8D97D-D43E8F1

[GoFast]

Anyone knows how to fix this it happens every time I hit execute

[thefiztec]

Thanks a lot!

[chuj123]

thanks man

[adrianhisam]

STOP!!! Read the Forum's Updated Rules now:  CLICK HERE

-------------------------------------------------------

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

Here is ISTA+ Standalone 4.56.30 built with ISTA-Patcher, ready to use for diagnosis.

The installer install all prerequisite when/if needed.

Features enabled are :
- Disable Fake FSC Reject
- ENET Programming Enabled
- Re-activated ICOM A1/A2
- Works with DCAN on port COM3 (Prerequisite : baudrate 115200 / latency 1ms) (shorcut on desktop to switch)
- Fix rescan old DS2 vehicles
- bypass ignition detection with DCAN/Ediabas (click cancel and it continues)
- Motorbike ignition detection disable with ENET (Erase error memory works with ENET)
- Disabled FASTA (Data Not Send)
- Programming works


This release comes as an installer all-in-one.
It installs everything like genuine BMW installer does.
No need to manually extract / run reg / create desktop shortcuts...

So it does not install in "C:\EC-APPS" (or anywere you wanted), but in "C:\Program Files\BMW\ISPI\TRIC\ISTA". (and other genuine BMW folders...)
So NO you won't be able to install if if you don't have enough space on your disk C:.

You CAN'T install it if ilean release is installed anymore (in case you usually did).

If you don't like this, feel free to build your own or wait for someone else to release another version.

You probably WILL have issues if you have standard tools installed *. So don't whine about ENET/ICOM not working or very long/slow scan (all modules shown red, etc...) if you have any other Ediabas installed on your computer...

Don't ask for help about this.

If you need programming, you will need to download and add SDP/psdzdata full yourself :
[link yet to be added once available]

Extract to:

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

You will find attached REG file to enable programming once/if you copied SDP yourself.

The installer needs a password, it is also available here (see below). Don't PM me !

The install process can be quite long, especially if you have an antivirus like Windows Defenter anti-malware. I suggest you to disable it to install it faster.

The ISTAGUI.exe has been obfuscated to protect it, it may trigger a false positive on your Antivirus, you will need to whitelist it.

Please don't ask here for your missing preferred language file. Wrong place to ask it for! ONLY En-GB file here!

* unless you really know what you are doing...

NO PERSONAL SUPPORT BY PM. I DON'T HAVE ANY OTHER LANGUAGE TO SHARE.
Any PM regarding this topic will be ignored.


P.S : If you had an earlier release, you have to UNINSTALL it first.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

Thanks a lot!

[Simoan]

Anyone knows how to fix this it happens every time I hit execute

This warning appears when:
the control unit VIN does not match the vehicle
a new or used control unit is detected
the vehicle order (FA/VO) does not match installed hardware
FSC or head unit changes are detected

With patched ISTA, this message often appears when:
a used control unit is installed
VIN has not been written
FA/VO is not correctly stored

[Rob]

Hi Rob,
My HWID:            62D46D6-549D6FF-54EA8CA-A952E14
Thanx a lot!!

Zethii

ZbDTUN-vmF5Qe-efmdi1-cWee7=-V7EOPR-JXPh2O-SQKYNA-8NQU0S-WKbVg9-qwbW8a-tTfzOs-eEji3L-b+wgFz-7miAPK-HmG725-OwRjfA-u9ZlEN-6DG6L9-d+9qve-JGf391-T3Yag3-XjFHDV-Rf0hQ7-deF8Zk-2oY4sy-TmtVeg