F82 idrive display screen

[Mantuanas]

Hi everyone,

I thinking upgarade 6.5 screen to 8.8 donor screen from bmw f82 toutch my car is f31 hu entrynav so I just wanna know this screen fit in my car?

Thank you

Regards M

[Rob]

@Mantuanas , Yes it will fit .

Apply these 2 parameters in esys

HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = breites_display

[Mantuanas]

@Mantuanas  , Yes it will fit .

Apply these 2 parameters in esys

HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = breites_display

thank you Rob

donor screen date is 17-02-2020
my hu entrynav is 2016-mid
will it really work because here is the new version I think,
or the screen may not show anything blank?

thank you

Regards M

[babyk]

@Mantuanas  , Yes it will fit .

Apply these 2 parameters in esys

HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = breites_display

thank you Rob

donor screen date is 17-02-2020
my hu entrynav is 2016-mid
will it really work because here is the new version I think,
or the screen may not show anything blank?

thank you

Regards M

Yes it will work, remember to code
CID_Touch = Aktiv
CID_Resolution = 1280 x 480
CID_Display_size = 8.8
DISPLAY_VARIANTE = breites_display

[Mantuanas]

Thank you babyk 

My hu entrynav is retrofit using donor vin on bmw website is a new software update so can I update software using usb? will after update need to code again?

Thank you

Regards M

[babyk]

Thank you babyk 

My hu entrynav is retrofit using donor vin on bmw website is a new software update so can I update software using usb? will after update need to code again?

Thank you

Regards M

You mean updating the Connected Drive software?

Yes, sure you can update it without any issue, it will not affect the coding

[Mantuanas]

Thank you babyk 

My hu entrynav is retrofit using donor vin on bmw website is a new software update so can I update software using usb? will after update need to code again?

Thank you

Regards M

You mean updating the Connected Drive software?

Yes, sure you can update it without any issue, it will not affect the coding

yes Drive software
  
thank you babyk

Regards M

[Mantuanas]

@Mantuanas  , Yes it will fit .

Apply these 2 parameters in esys

HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = breites_display

thank you Rob

donor screen date is 17-02-2020
my hu entrynav is 2016-mid
will it really work because here is the new version I think,
or the screen may not show anything blank?

thank you

Regards M

Yes it will work, remember to code
CID_Touch = Aktiv
CID_Resolution = 1280 x 480
CID_Display_size = 8.8
DISPLAY_VARIANTE = breites_display

Hi,
I done coding on my HU_ENTRYNAV and screen still show NO SIGNAL
Maybe problem is APIX1-APIX2? Different voltage? And on my HU_ENTRYNAV can’t find apix coding option I think is only on NBT and NBT EVO
My HU_ENTRYNAV 2016 SCREEN 2020 EVO TOUCH
Maybe cable problem? Or voltage?

any ideas?

THANK YOU

REGARDS M

[Rob]

Thought you retrofitted NBT EVO as well , apologies.

[Tuerkay]

Correct me if i´m wrong but isn´t HU_Entrynav based on NBT (not evo)?
If that´s the case, the F82 touch Screen won´t work.
The Screen needs APIX2, MII interface and 12V while the HU_Entrynav supports APIX1, SPI and 9.5V