05-29-2023, 04:13 PM
Hello everyone!
My friend had his car's injectors replaced by a 3-rd party shop, but unfortunately they were not able to code the new injector numbers to the DDE.
I tried to do it myself using ISTA+ 4.39.20 but with no success.
When trying to "SAVE" the new numbers to DDE I get an error: "Incorrect vehicle status or incorrect matching values entered!"
Hardware is Expert K+DCAN Cable from BimmerGeeks (https://www.bimmergeeks.net/product-page...on-k-dcan1)
I attached the image file to this post also.
Anyone has any idea why this is happening? Would it work with original ICOM Next?
My friend had his car's injectors replaced by a 3-rd party shop, but unfortunately they were not able to code the new injector numbers to the DDE.
I tried to do it myself using ISTA+ 4.39.20 but with no success.
When trying to "SAVE" the new numbers to DDE I get an error: "Incorrect vehicle status or incorrect matching values entered!"
Hardware is Expert K+DCAN Cable from BimmerGeeks (https://www.bimmergeeks.net/product-page...on-k-dcan1)
I attached the image file to this post also.
Anyone has any idea why this is happening? Would it work with original ICOM Next?