Posts: 20
Threads: 2
Joined: Jul 2020
Reputation:
0
Country:
Hi everyone,
I thinking upgarade 6.5 screen to 8.8 donor screen from bmw f82 toutch my car is f31 hu entrynav so I just wanna know this screen fit in my car?
Thank you
Regards M
•
Posts: 2,378
Threads: 337
Joined: Mar 2020
Reputation:
1,678
Country:
@ Mantuanas , Yes it will fit .
Apply these 2 parameters in esys
HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = breites_display
•
Posts: 20
Threads: 2
Joined: Jul 2020
Reputation:
0
Country:
(09-12-2020, 01:46 AM)Rob Wrote: @Mantuanas , Yes it will fit .
Apply these 2 parameters in esys
HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = breites_display
thank you Rob
donor screen date is 17-02-2020
my hu entrynav is 2016-mid
will it really work because here is the new version I think,
or the screen may not show anything blank?
thank you
Regards M
•
Posts: 39
Threads: 0
Joined: Sep 2020
Reputation:
3
Country:
(09-12-2020, 05:14 AM)Mantuanas Wrote: (09-12-2020, 01:46 AM)Rob Wrote: @Mantuanas , Yes it will fit .
Apply these 2 parameters in esys
HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = breites_display
thank you Rob
donor screen date is 17-02-2020
my hu entrynav is 2016-mid
will it really work because here is the new version I think,
or the screen may not show anything blank?
thank you
Regards M
Yes it will work, remember to code
CID_Touch = Aktiv
CID_Resolution = 1280 x 480
CID_Display_size = 8.8
DISPLAY_VARIANTE = breites_display
•
Posts: 20
Threads: 2
Joined: Jul 2020
Reputation:
0
Country:
Thank you babyk
My hu entrynav is retrofit using donor vin on bmw website is a new software update so can I update software using usb? will after update need to code again?
Thank you
Regards M
•
Posts: 39
Threads: 0
Joined: Sep 2020
Reputation:
3
Country:
(09-12-2020, 07:11 AM)Mantuanas Wrote: Thank you babyk
My hu entrynav is retrofit using donor vin on bmw website is a new software update so can I update software using usb? will after update need to code again?
Thank you
Regards M
You mean updating the Connected Drive software?
Yes, sure you can update it without any issue, it will not affect the coding
•
Posts: 20
Threads: 2
Joined: Jul 2020
Reputation:
0
Country:
(09-12-2020, 09:36 AM)babyk Wrote: (09-12-2020, 07:11 AM)Mantuanas Wrote: Thank you babyk
My hu entrynav is retrofit using donor vin on bmw website is a new software update so can I update software using usb? will after update need to code again?
Thank you
Regards M
You mean updating the Connected Drive software?
Yes, sure you can update it without any issue, it will not affect the coding
yes Drive software
thank you babyk
Regards M
•
Posts: 20
Threads: 2
Joined: Jul 2020
Reputation:
0
Country:
(09-12-2020, 06:09 AM)babyk Wrote: (09-12-2020, 05:14 AM)Mantuanas Wrote: (09-12-2020, 01:46 AM)Rob Wrote: @Mantuanas , Yes it will fit .
Apply these 2 parameters in esys
HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = breites_display
thank you Rob
donor screen date is 17-02-2020
my hu entrynav is 2016-mid
will it really work because here is the new version I think,
or the screen may not show anything blank?
thank you
Regards M
Yes it will work, remember to code
CID_Touch = Aktiv
CID_Resolution = 1280 x 480
CID_Display_size = 8.8
DISPLAY_VARIANTE = breites_display
Hi,
I done coding on my HU_ENTRYNAV and screen still show NO SIGNAL
Maybe problem is APIX1-APIX2? Different voltage? And on my HU_ENTRYNAV can’t find apix coding option I think is only on NBT and NBT EVO
My HU_ENTRYNAV 2016 SCREEN 2020 EVO TOUCH
Maybe cable problem? Or voltage?
any ideas?
THANK YOU
REGARDS M
•
Posts: 2,378
Threads: 337
Joined: Mar 2020
Reputation:
1,678
Country:
Thought you retrofitted NBT EVO as well , apologies.
•
Posts: 108
Threads: 13
Joined: May 2020
Reputation:
12
Country:
Correct me if i´m wrong but isn´t HU_Entrynav based on NBT (not evo)?
If that´s the case, the F82 touch Screen won´t work.
The Screen needs APIX2, MII interface and 12V while the HU_Entrynav supports APIX1, SPI and 9.5V
•
|