FA/VO Change After CCC > CIC

[needthedaten]

Just wanted to follow up and confirm the only change that I think I actually needed to do was remove $6VB from the VO so it wasn't throwing errors. Doing this seemed to have allowed me to see the CIC module when I loaded the FA/VO into ncsexpert. In order to actually read the CIC module, I needed to have the correct sp-daten data as noted above (this will be obvious to most I think but I had been working on two different cars so I had neglected to update the data).

The next thing I wanted to tackle was coding HD radio into the car. My car didn't have HD radio from the factory (which turns out is a good thing for the CIC retrofit) but the CIC head unit did have HD radio (perhaps they all do). I was able to add HD radio to the VO ($653) and then make HD radio "active" so it shows up in iDrive by setting RADIO_IBOC to "aktiv".

I did read somewhere that writing the incorrect production date (e.g. FA_WRITE $0909) to CIC and LMA isn't necessary (or desireable) but you may need to change it to enable some features to be coded to the module (or something to that effect, whomever is reading this, I'm guessing on this so do your research).