09-18-2024, 08:54 PM
(This post was last modified: 09-18-2024, 08:58 PM by Phantome46.)
I have plugged in ISTA D with a D can cable to my E46
Made a change to the edibas.ini to STD:OBD
Changed ista settings to edibas.ini
When I tried to read the car had the following errors
The vehicle identification number could not be identified. Please enter the 7 or 17 digit number to continue
I entered the chassis number and it failed
Next error
The programming system could not be initialised. The ista installation might be damaged
Any ideas
Made a change to the edibas.ini to STD:OBD
Changed ista settings to edibas.ini
When I tried to read the car had the following errors
The vehicle identification number could not be identified. Please enter the 7 or 17 digit number to continue
I entered the chassis number and it failed
Next error
The programming system could not be initialised. The ista installation might be damaged
Any ideas
![[-]](https://www.bimmerscene.com/images/collapse.png)