Updating ecu Tal problem

[martin911]

Hi

First of all, don't flash with esys when it's oepn with lancher. Open it without a launcher.
Second, after calculation press SVT_Target , press on "HW-IDs from SVTactual", then save it.



Then calculate Tal and flash it.

It will work!

Cool. I usually flash through Launcher without problems, but will do it without next

Just to be clear, first HW id, then save and lastly calculate?


BTW, what did I do wrong, i Mean, what is the problem the way i did it since it did not work?

Calculate SVT Target
Click on HW-IDs
Calculate TAL

Then Flash

Just keep in mind that ALWAYS your HWEL needs to be black before doing TAL Calculation
If not the Flash will fail.

Now a new error occured?

Read SVT before TAL execution started.

 

TAL execution started.

ExecutionID=2021/02/20-18:12:55.963

[] prepareTALExecution started [PROGRESS]

[] prepareTALExecution finished [PROGRESS]

[] prepareVehicleForFlash started [PROGRESS]

[] prepareVehicleForFlash finished [PROGRESS]

[TV_MODUL - 4B] prepareECUforBLUpdate started [PROGRESS]

[TV_MODUL - 4B] prepareECUforBLUpdate finished [PROGRESS]

[TV_MODUL - 4B] authenticateECUforBLUpdate started [PROGRESS]

[TV_MODUL - 4B] authenticateECUforBLUpdate finished [PROGRESS]

[TV_MODUL - 4B - flsl_0000050c-005_000_027] Transaction type: blFlash;  Message: TA started [TRANSACTION]

[TV_MODUL - 4B] performECUBLUpdate started with protocol UDS [PROGRESS]

[TV_MODUL - 4B - flsl_0000050c-005_000_027] Transaction type: blFlash;  Message: 0% progress on ECUId:TV_MODUL_0x4B [0% of flsl_0000050c-005_000_027] [TRANSACTION]

MCDDiagService<id=56649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RC_EM_IE - RoutineControl EraseMemory IndicatedErasing, description=error: negative response : requestOutOfRange, link=TV_MODUL_4B_ETHERNET> [DIAGSERVICE]

[TV_MODUL - 4B - flsl_0000050c-005_000_027] Transaction type: blFlash;  Message: 0% progress on ECUId:TV_MODUL_0x4B [0% of flsl_0000050c-005_000_027] [TRANSACTION]

[] job failed with negative response error:

 code: repeat job

description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: TV_MODUL_4B_ETHERNET

severity: ERROR

[THROWABLE]

[TV_MODUL - 4B - flsl_0000050c-005_000_027] Transaction type: blFlash;  Message: TA finished [TRANSACTION]

[TV_MODUL - 4B] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error:

 code: repeat job

description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: TV_MODUL_4B_ETHERNET

severity: ERROR

[WARN]

[TV_MODUL - 4B] - [Exception - TV_MODUL - 4b] job failed with negative response error:

 code: repeat job

description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: TV_MODUL_4B_ETHERNET

severity: ERROR

 

[TV_MODUL - 4B] prepareECUforBLUpdate started [PROGRESS]

MCDDiagService<id=230726, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforBLUpdate, service=DSC - DiagnosticSessionControl, description=error: negative response : subFunctionNotSupportedInActiveSession, link=TV_MODUL_4B_ETHERNET> [DIAGSERVICE]

MCDDiagService<id=34727, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforBLUpdate, service=CDTCS - ControlDTCSetting, description=error: negative response : serviceNotSupportedInActiveSession, link=TV_MODUL_4B_ETHERNET> [DIAGSERVICE]

MCDDiagService<id=230726, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforBLUpdate, service=DSC - DiagnosticSessionControl, description=error: negative response : subFunctionNotSupportedInActiveSession, link=TV_MODUL_4B_ETHERNET> [DIAGSERVICE]

[TV_MODUL - 4B] prepareECUforBLUpdate finished [PROGRESS]

[TV_MODUL - 4B] authenticateECUforBLUpdate started [PROGRESS]

[TV_MODUL - 4B] authenticateECUforBLUpdate finished [PROGRESS]

[TV_MODUL - 4B - flsl_0000050c-005_000_027] Transaction type: blFlash;  Message: TA started [TRANSACTION]

[TV_MODUL - 4B] performECUBLUpdate started with protocol UDS [PROGRESS]

MCDDiagService<id=56649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RC_EM_IE - RoutineControl EraseMemory IndicatedErasing, description=error: negative response : requestOutOfRange, link=TV_MODUL_4B_ETHERNET> [DIAGSERVICE]

[TV_MODUL - 4B - flsl_0000050c-005_000_027] Transaction type: blFlash;  Message: 0% progress on ECUId:TV_MODUL_0x4B [0% of flsl_0000050c-005_000_027] [TRANSACTION]

[] job failed with negative response error:

 code: repeat job

description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: TV_MODUL_4B_ETHERNET

severity: ERROR

[THROWABLE]

[TV_MODUL - 4B - flsl_0000050c-005_000_027] Transaction type: blFlash;  Message: TA finished [TRANSACTION]

[TV_MODUL - 4B] There was an error during TAL execution, please check the log files. [WARN]

[TV_MODUL - 4B] - [Exception - TV_MODUL - 4b] job failed with negative response error:

 code: repeat job

description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: TV_MODUL_4B_ETHERNET

severity: ERROR

 

[TV_MODUL - 4B] installECUBL started [PROGRESS]

[TV_MODUL - 4B] installECUBL finished [PROGRESS]

[TV_MODUL - 4B] finalizeECUBLUpdate started [PROGRESS]

[TV_MODUL - 4B] finalizeECUBLUpdate finished [PROGRESS]

[] There was an error, please check the log files. [WARN]

[] - [Exception - TV_MODUL - 4b] job failed with negative response error:

 code: repeat job

description: Service RC_EM_IE returned a negative response with response code requestOutOfRange; LinkName: TV_MODUL_4B_ETHERNET

severity: ERROR

 

[] finalizeVehicleFlash started [PROGRESS]

MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeVehicleFlash, service=DSC - DiagnosticSessionControl, description=error: timeout, link=HU_CIC_63_ETHERNET> [DIAGSERVICE]

MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_FinalizeVehicleFlash, service=DSC - DiagnosticSessionControl, description=error: timeout, link=HU_CIC_63_ETHERNET> [DIAGSERVICE]

[] finalizeVehicleFlash finished [PROGRESS]

[] prepareVehicleForCoding started [PROGRESS]

[] prepareVehicleForCoding finished [PROGRESS]

[] finalizeVehicleCoding started [PROGRESS]

[] finalizeVehicleCoding finished [PROGRESS]

[] finalizeTALExecution started [PROGRESS]

[] finalizeTALExecution finished [PROGRESS]

TAL execution finished [TAL_EXECUTION_FINISHED]

TAL-Execution finished with status: "FinishedWithError". [C207]

TAL execution finished. Duration: "2min 45s". [C206]

 

Read SVT after TAL execution started.

Read SVT after TAL execution finished.