Need urgent help (paid remote assistance ok): ISTA programming failure → starter lock

[gumba128]

Hi everyone — I’m looking for urgent help and I’m willing to pay for remote assistance from someone experienced (ISTA/E-Sys/G-series/G05 recovery).
What happened (short version)

• I was working in ISTA+ and it entered a programming / measures plan type process.
  
• During that process, ISTA reported a failure and then displayed a message indicating it could not undo / release the starter lock (starter interlock).
  
• After that point, things went downhill fast: I’m now dealing with widespread communication issues and the car is effectively “down” (modules not responding normally, screens/operation not right, and diagnostic sessions are unstable).
  

Current symptoms

• ISTA frequently loses communication with the vehicle during functions/tests.
  
• E-Sys connection attempts are failing as well (can’t reliably establish/maintain a session).
  
• Overall: car is not behaving normally and I can’t get it back into a stable state to complete diagnostics/programming.
  

What I’m asking

• If you have experience recovering a G-series after an ISTA programming interruption/failure (especially involving starter lock not releasing), please reply or DM me.
  
• I’m specifically looking for someone who can remote in) and guide me step-by-step or directly help run the correct recovery procedure.
  
• I can provide logs/screenshots, ISTA version info, interface type (ENET/ICOM), and current battery/charger setup.
  

If you’re the right person (or can recommend someone reputable who does this kind of recovery), please message me with your experience, availability, and what info you need from me first.
Thanks,