10-17-2020, 07:13 PM
Hi Fransesco,
You can choose any S18A, it doesn't really matter as long as it doesn't have _DIRECT.
You don't see the correct mapping when you try to edit FDL because Launcher Pro 2.8.1 is an old version, not really designed for G series. You need to look for Launcher Pro 3.x for your G21 ( you will need to purchase a license).
Now with LP 2.8.1, you normally should see some correct mappings with other ecus such as the Hu or instrument cluster.
Diagnostic mode should be ok to fdl code, but sometimes you will to start the engine, then turn it off, in order to get the full SVT list.
You can choose any S18A, it doesn't really matter as long as it doesn't have _DIRECT.
You don't see the correct mapping when you try to edit FDL because Launcher Pro 2.8.1 is an old version, not really designed for G series. You need to look for Launcher Pro 3.x for your G21 ( you will need to purchase a license).
Now with LP 2.8.1, you normally should see some correct mappings with other ecus such as the Hu or instrument cluster.
Diagnostic mode should be ok to fdl code, but sometimes you will to start the engine, then turn it off, in order to get the full SVT list.
Password to all uploads is bimmerscene.com