6.5 screen to 8.8 Question

[KillerBeePT]

At entrynav systems and android units with 10.25 inch screen, what resolution have to code? 8.8 or 10.25 ?

Normally you don't need to code anything for the Android unit to work with the car. But if you still want to change it so that it show the BMW interface full screen on your Android unit, you have to do the following:

• 1st part - Android unit config
  

1. On Android interface, go to the Settings and search for "Factory Settings" or similar
   
2. Use code 1314 to open the Factory Settings (if this code doesn't work, check with you seller the correct one)
   
3. In "CAN type" or "Car type" chose the option that most suits your needs
   
4. Change the system to the BMW OEM interface and check if everything is ok. If not, do everything again until you are happy with this part
   

• 2nd part - BMW HU config - only works with HU_ENTRYNAV system (check attached pic)
  

1. Connect your computer to the car and and code the following: (search for How-to on coding Fxx series on the forum if needed)
   

• HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
  
• HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = breites_display