Bmw F11 RSE retrofit help

[martin911]

Hello,

I have undertaking a larger project, and maybe I'm in over my head.

Everything is installed, but I have trouble coding it to the car.

I have successfully vo coded the RSE and the CIC. But I am having trouble my my screens.i can't get to flash them. The Hwell stays blue or red.

I tried to get Hw I'd from sat actual with no luck.

I guess the 2 CIDs in esys are the rear screens, eventhough I thought they would be called Fd and Fd2.

Another peculiar thing is, that when I calculate TAL, it shows both Rse mid and Rse High. I only vo coded the mid, as the high option is for 7 series with the controller in the rear seat.


Any help is appreciated before I ship it off to a professional.

A last remark could be that I messed something up in the wiring, but it should be OK.

The screens turn on when I start the car, but the image is orange and the they turn off (I can send a blue test image to both screens in ista)

(Disregard all my other faults most of them is due to an other retrofit I'm into (surround view), I just need to connect the right mirror camera properly.                            

Sendt fra min SM-G991B med Tapatalk