F10 Adaptive Xenon Headlights No High Beams?

[MobileBmwCoding]

Whats going on guys I have two BMW F10's I am working on with both the exact same issue. For some reason the adaptive xenon headlights that we put in wont allow us to use the high beams unless we turn the headlights off then pulling the lever it works just fine but if turn the lights back on and pull the lever nothing. We flashed both vehicles headlight modules with E-SYS and Initialized the headlights LEDS with ISTA(D) both cars headlights are working perfectly just the High beams will not work. One of the cars we replaced because he wanted to go from halogen to Xenon and VO coded the headlights in with the correct feature. The other vehicle went from Xenon to Xenon but had water damage only on the left and only replaced the left side headlight and module. I only ran into this issue with Adaptive Xenon for some reason. Any thoughts on what else I can do to fix this. not sure if its the vertical aim needs to be adjusted. Please let me know what it can be. One is 2011 CIC and the other is 2015 NBT. Thanks