[SOLVED] Fuses for hardwire dashcam

[XuLeTZ]

i everyone,

Yesterday I bought a VIOFO A129 PRO DUO 4K Dashcam.
It comes without fuses. I need to order the fuse kit as well.
My question is, does anybody knows where to plug them? in what fuse number?
I have an F31, but I think F30 has the same exact fuses.

The kit is coming with 3 wires, red for 24/7 power to dashcam, yellow is for ACC (accesories I think), and the black wire is the ground.
As far as I know, there are 4 kind of fuses. ATC, ATS, MICRO2 and MINI.
Can somebody advise where and what to plug for 24/7 fuse and what and where to plug for engine on?
It has voltage protection and if the battery drops to the configured value, it doesn`t give power to dashcam to not drain the battery.

Thanks in advance.

UPDATE: 
I connected the dashcam wires to fuses from the boot on #161 (RED) and #143 (yellow) but I was getting the battery drain error.
In the end I simply connected the hardwire directly to FEM as per diagram.
Yellow cable to #33
Red cable to #20
Black(ground) to #24
Everything is working perfectly fine and much easier to hardwire to FEM than fusebox.