01-17-2023, 07:02 PM
Hello all,
I am trying to code the Alpina B7 Transmission on to my G12 750 (2016) vehicle. I was following along some guides/videos from my understanding, I am to input the vehicle code base on VIN decode (7F13 for B7 in USA for G12) and the production year (which in my case I found a VIN with production year 1216). I input those into the appropriate FA subfolder group FA>FZAuftrag>Type. The default ones for my vehicle were Vehicle code 7F23 and Production 0715. ISTA shows I-Level at S15A-22-07-530. I am using E-Sys 3.40.2 and latest PSdZData Lite 4.39.20. The car is connected via ENET cable using the VIN target. I-step target is S15A-22-07-534.
When I right click FA and hit Calculate FP after inputting options 920 and 9XA into the SALAPA-Element folder, I get the following error:
"No FP could be generated from FA "". [C002]
Not all elemnts of the FA were found in the FA2FP: Type code 7F13 Zeitkriterium 1216
[72]"
When reverting the Vehicle Code back to my origional 7F23 type and 0715 production date, the calculate FP runs fine, with the 920 and 9XA within the SALAPA-Element folder. I have not written anything to the FA after encounter this issue, and am curious, why am I getting this error? I'm not terribly experienced with E-sys so forgive me if I'm missing an obvious issue.
I am trying to code the Alpina B7 Transmission on to my G12 750 (2016) vehicle. I was following along some guides/videos from my understanding, I am to input the vehicle code base on VIN decode (7F13 for B7 in USA for G12) and the production year (which in my case I found a VIN with production year 1216). I input those into the appropriate FA subfolder group FA>FZAuftrag>Type. The default ones for my vehicle were Vehicle code 7F23 and Production 0715. ISTA shows I-Level at S15A-22-07-530. I am using E-Sys 3.40.2 and latest PSdZData Lite 4.39.20. The car is connected via ENET cable using the VIN target. I-step target is S15A-22-07-534.
When I right click FA and hit Calculate FP after inputting options 920 and 9XA into the SALAPA-Element folder, I get the following error:
"No FP could be generated from FA "". [C002]
Not all elemnts of the FA were found in the FA2FP: Type code 7F13 Zeitkriterium 1216
[72]"
When reverting the Vehicle Code back to my origional 7F23 type and 0715 production date, the calculate FP runs fine, with the 920 and 9XA within the SALAPA-Element folder. I have not written anything to the FA after encounter this issue, and am curious, why am I getting this error? I'm not terribly experienced with E-sys so forgive me if I'm missing an obvious issue.
![[-]](https://www.bimmerscene.com/images/collapse.png)