Coding Alpina B7 Transmission on G12 750

[thespectr3]

Change the build level to 1215. Ilevel Shipment i would keep it same. I level target will be according to the psdzdata you downloaded

Thanks for the tip!

Strangely, when I change the build date, and calculate FP, E-sys produces error and doesn't accept the 1215 change.

---

Change the build level to 1215. Ilevel Shipment i would keep it same. I level target will be according to the psdzdata you downloaded

I changed the SALAPA-Element to include 920 and 9XA, then I maintained the Ship to what ISTA shows vehicle shipment software was, while selecting I-level target to be according to PSzData as S15A-22-07-534. After I hit "calculate" I see that nothing is red in the EGS category. I am getting red in DME_BAC2 [12], Red in DME_BAC2 [13], EPS2 [30], HU-NBT2 [63] two blues, and 1 red in VDP [76]. This is keeping the vehicle code and manufacture date as what is stock for my vehicle. I did not code anything yet, and was wondering what the problem is that is causing this?

I did get the anti-glare headlights coded into the vehicle. Is the changes I'm seeing because of this? Strange that 920 and 9XA are not showing changes for the EGS.

*EDIT*

I think I figured out why I am seeing nothing in EGS. When I change the ship date, since RealOEM indicates no B7 prior to 1215, I need the I-Step (Shipm) to reflect the appropriate date for the new build date since keeping the vehicle code 7F23 as is the G12 which the B7 is built on. So for example, if I select 0316 as the new manufactured date, the I-Step (Shipm) can be moved to S15A-16-03-503 and I-step (target) latest according to PSzData loaded which shows in my case as S15A-22-07-534, as my current I-step is 07-530. This shows a new EGS now populating in Blue/Red under EGS with SWFL_00002AA7_166-002-001 set to change to SWFL_00003BB7_166_090_003. I think this may be the answer?