Connect E-Sys
Go to Expert Mode >> Coding >> Read Vehicle Order >> Save >> Edit.
This will take you to FA editor. Right click on FA and select Calculate FP. Expand FAList on left to SALAPA-element.
In the bottom, add 609 and change 6NH to 6NS. Click apply. Calculate FP again. Save.
Go to Expert Mode >> VCM >> Load the saved FA file in the bottom section, file tab >> Right-click FA and Calculate FP >> Go to VCM Master tab >> write FA FP.
The you need to VO code NBT and Kombi as following:
Expert Mode >> Coding >> Read FA (VO) >> Activate FA (VO) >> Read SVT (VCM) >> Left-Click on HU_NBT >> "Detect CAF for SWE"
>> Select the latest CAFD displayed >> OK >> Right-Click on HU_NBT (the ECU itself not the underlying CAFD) => CODE.
Then you can use FSC repair kit and import necessary fsc and install maps.
Go to Expert Mode >> Coding >> Read Vehicle Order >> Save >> Edit.
This will take you to FA editor. Right click on FA and select Calculate FP. Expand FAList on left to SALAPA-element.
In the bottom, add 609 and change 6NH to 6NS. Click apply. Calculate FP again. Save.
Go to Expert Mode >> VCM >> Load the saved FA file in the bottom section, file tab >> Right-click FA and Calculate FP >> Go to VCM Master tab >> write FA FP.
The you need to VO code NBT and Kombi as following:
Expert Mode >> Coding >> Read FA (VO) >> Activate FA (VO) >> Read SVT (VCM) >> Left-Click on HU_NBT >> "Detect CAF for SWE"
>> Select the latest CAFD displayed >> OK >> Right-Click on HU_NBT (the ECU itself not the underlying CAFD) => CODE.
Then you can use FSC repair kit and import necessary fsc and install maps.