02-05-2024, 02:07 PM
(02-05-2024, 01:52 PM)svenson Wrote: You need ZGW2 without MOST or the right ZGW2 software on your ZGW. Then you must pinout MOST from ZGW and close the wires with interconnector. Normaly on your car is ZGW the MOST-Master. With NBT-HU the MOST-Master is the NBT-HU.Aware of the VCM read, always using ECU read for that same reason. Then my suspicions were correct. So to get it correctly working I would need a ZGW2 or a correct flash on the ZGW and remove the emulator?
BTW. only "ECU read" can read out your actual SVT. If you use "VCM read" it will give old SVT back.
MOST has already been removed from ZGW and MOST from emulator (emulator has 1 most port) is connected to ZGW.
Thank you for the input!