Hi teamf1,
According to the schematic, pin 51 (k-can-low) and 52 (k-can-high) will only be wired if your car was build with trsvc, tirepressure control or an trailer module. If you're retrofitting one of these, you have to get some MQS pins and plug those into the empty slots.
According to the schematic, pin 51 (k-can-low) and 52 (k-can-high) will only be wired if your car was build with trsvc, tirepressure control or an trailer module. If you're retrofitting one of these, you have to get some MQS pins and plug those into the empty slots.
![[-]](https://www.bimmerscene.com/images/collapse.png)