G21 - some problem with esys... help

[fpgiuliano]

Hi Fransesco,

You can choose any S18A, it doesn't really matter as long as it doesn't have _DIRECT.

You don't see the correct mapping when you try to edit FDL because Launcher Pro 2.8.1 is an old version, not really designed for G series. You need to look for Launcher Pro 3.x for your G21 ( you will need to purchase a license).

Now with LP 2.8.1, you normally should see some correct mappings with other ecus such as the Hu or instrument cluster.

Diagnostic mode should be ok to fdl code, but sometimes you will to start the engine, then turn it off, in order to get the full SVT list.

thanks for reply

Actually I would just like to code only the Lane Change Assist i because in my country is disabled (Italy). I read in some forum that it is possible to do it through VO Coding, simply with e-sys (without launcher pro).
is it true?

Can you tell me which code I need to add or delete in VO Coding? (Bmw g21 - 2019)
thanks to all!
francesco