BMW ISTA-D 4.53.40 Standalone Activated - Torrent

[ir655]

Hello Everyone,

Are you able to use ISTA with the full PSDZdata database? If I put the latest full database to data_swi folder, change the related settings in registry, the application starts, displays the programming data version, however Vehicle Identification test can not run. After the connection setup it stops. I use ENET cable.

Any idea? Thanks!

Check the registry setting of the path of the programming database, if it's "data" change it to "data_swi"

[kmi]

Hello,

I have tried this version of ista with an Ethernet cable on a motorcycle. It performs the diagnosis correctly, but it does not work when clearing the fault memory or resetting the service. The error ‘Unknown terminal voltage’ appears, with the option ‘Details and OK’. The ‘Cancel’ option does not appear, which, as I understand it, allows you to continue with the fault memory clearing process when pressed in cars.

Is it possible to patch ista with this same functionality for motorcycles?

Until now, older versions used Node Voltage Control, which does not work in modern versions of ista.

[acosuper]

Not working with ICOM

[e36#323]

I can't seem to get it working with k+d can cable. AM i doing something wrong? This is my first time with ista

[kmi]

Hello Everyone,

Are you able to use ISTA with the full PSDZdata database? If I put the latest full database to data_swi folder, change the related settings in registry, the application starts, displays the programming data version, however Vehicle Identification test can not run. After the connection setup it stops. I use ENET cable.

Any idea? Thanks!

I have the same problem with the enet cable. This is my configuration added to the registry.

Code:

[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\ISTA]
"SWIData"="4.53.40"

[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\Rheingold]
"BMW.Rheingold.Programming.ExpertMode"="True"
"BMW.Rheingold.Programming.Enabled"="True"
"BMW.Rheingold.Programming.PsdzDataPath"="..\\..\\..\\PSdZ\\data_swi"

[Evgeny]

Hi All
I have tested this version with enet and icom next (orig). Works fine. But It cant work with dcan. Another programs (inpa tool32 works fine)
Can this version of program works with dcan? Is it possile?
BIG Thanks to author for the work.

[wirann]

seem doesn't working full function with Chinese icom (A1, A2)

[e36#323]

Hello Everyone,

Are you able to use ISTA with the full PSDZdata database? If I put the latest full database to data_swi folder, change the related settings in registry, the application starts, displays the programming data version, however Vehicle Identification test can not run. After the connection setup it stops. I use ENET cable.

Any idea? Thanks!

I have the same problem with the enet cable. This is my configuration added to the registry.

Code:

[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\ISTA]
"SWIData"="4.53.40"

[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\Rheingold]
"BMW.Rheingold.Programming.ExpertMode"="True"
"BMW.Rheingold.Programming.Enabled"="True"
"BMW.Rheingold.Programming.PsdzDataPath"="..\\..\\..\\PSdZ\\data_swi

I had the same with my k+d can cable. Went to version 4.39 and it seems to run without any problems.

[kmi]

@ir655, The ExecutionBreak_4.53.41.7z file only contains the empty ExecutionBreak folder, is this okay?

Thanks.

[MuddyPaws]

seem doesn't working full function with Chinese icom (A1, A2)

If you look on page 46 of the help for this version it states:

"ICOM A and A2 can no longer be used from April 2025. From then on, only ICOM Next will be supported."

I believe this applies to this version.