RDC retrofit F30 2012

[ariciul]

Hello,

I bought an used RDC module from ebay and i'm trying to code it (have wheels with original sensor which worked on other car)
Coded 2VB option into FA, now i can see it in the list when i read FA

I dont see a CAFD file, when i try detect CAF for SWE i get the error message:
"No CAFD-Mapping for base variant "RDC" found [G090]"

Tried different versions of E-sys, psdzdata lite and full, tried on another's friend e-sys/psdzdata and also on his F10, no success.

I found some info that says the RDC module needs to be flashed as it does not have a CAFD file.

I'm a bit stuck, i'd appreciate any help/advice you might have.

Thanks a lot.

PS: not my first retrofit, also did electric tow trailer hitch and shift paddles, no issues there.

[TheNine90]

Flash the module

[Memedalji_]

Hello,

I bought an used RDC module from ebay and i'm trying to code it (have wheels with original sensor which worked on other car)
Coded 2VB option into FA, now i can see it in the list when i read FA

I dont see a CAFD file, when i try detect CAF for SWE i get the error message:
"No CAFD-Mapping for base variant "RDC" found [G090]"

Tried different versions of E-sys, psdzdata lite and full, tried on another's friend e-sys/psdzdata and also on his F10, no success.

I found some info that says the RDC module needs to be flashed as it does not have a CAFD file.

I'm a bit stuck, i'd appreciate any help/advice you might have.

Thanks a lot.

PS: not my first retrofit, also did electric tow trailer hitch and shift paddles, no issues there.

i can help you with that, you can send me private message for whatsapp or facebook

[Siki78]

Hello,

I bought an used RDC module from ebay and i'm trying to code it (have wheels with original sensor which worked on other car)
Coded 2VB option into FA, now i can see it in the list when i read FA

I dont see a CAFD file, when i try detect CAF for SWE i get the error message:
"No CAFD-Mapping for base variant "RDC" found [G090]"

Tried different versions of E-sys, psdzdata lite and full, tried on another's friend e-sys/psdzdata and also on his F10, no success.

I found some info that says the RDC module needs to be flashed as it does not have a CAFD file.

I'm a bit stuck, i'd appreciate any help/advice you might have.

Thanks a lot.

PS: not my first retrofit, also did electric tow trailer hitch and shift paddles, no issues there.

Can you upload your fa and svt_ist?

[ariciul]

Here they are, thanks

[Production044]

Hello,

I bought an used RDC module from ebay and i'm trying to code it (have wheels with original sensor which worked on other car)
Coded 2VB option into FA, now i can see it in the list when i read FA

I dont see a CAFD file, when i try detect CAF for SWE i get the error message:
"No CAFD-Mapping for base variant "RDC" found [G090]"

Tried different versions of E-sys, psdzdata lite and full, tried on another's friend e-sys/psdzdata and also on his F10, no success.

I found some info that says the RDC module needs to be flashed as it does not have a CAFD file.

I'm a bit stuck, i'd appreciate any help/advice you might have.

Thanks a lot.

PS: not my first retrofit, also did electric tow trailer hitch and shift paddles, no issues there.

i can help you with that, you can send me private message for whatsapp or facebook

Hi, mate!
Could you help me with this problem?

I have installed RDC for my f30.

As I know RDC and TPMS from f10

6856227 and 6876227


CAFD file is not displayed in RDC module in esys.


When I trying to connect via f30 and f10 and "detect kaf for sve" it gives an error.


The RDC block in ista is displayed but gives an error about the module from another car.

ESYS 3.30 via Launcher, lite pszdata.

Thanks