Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY)

[Jimi12312345]

Co jest zainstalowane?

- Inpa 5.0.6 (z plikami skryptów w języku angielskim i obsługą serii F)

- EDIABAS 7.3.0

- NCS Expert (z menu i przyciskami w języku angielskim oraz preinstalowanym profilem NCS Dummy Profile)

- NCS Dummy 4.0.1

- Narzędzie32 4.0.3

- WinKFP 5.3.1

- Zintegrowano SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (do wykorzystania jako alternatywa dla NCS Dummy lub do aktualizacji plików DATEN w miarę pojawiania się nowych)

- Sterowniki USB do kabla

Dlaczego jest to korzystne?

- Jedna instalacja zainstaluje WSZYSTKIE programy potrzebne do kodowania i diagnostyki, zaktualizuje programy, aby wyświetlały menu w języku angielskim, skonfiguruje NCSExpert z prawidłowym profilem NCSDummy, automatycznie zainstaluje sterowniki USB i jest zintegrowany z SP-DATEN 53.3 (TAK, zintegrowany!)

- Wszystkie najnowsze wersje programów w jednym, schludnym pliku instalacyjnym

- Brak konieczności polowania lub wyszukiwania danych SP-DATEN, a następnie zmagania się z ich importowaniem

- MAŁY rozmiar pliku. Cały pakiet ma tylko 170 MB!! Nie ma potrzeby pobierania 15 GB plików DATEN.

- Zmienne środowiskowe PATH systemu obsługiwane przez instalator

- Dołączony i automatycznie zainstalowany sterownik USB (oraz automatyczne ustalenie, czy potrzebujesz sterownika 32-bitowego czy 64-bitowego)

JEDYNA rzecz, którą użytkownicy muszą zrobić, to zmienić konfigurację portu COM na COM1 po instalacji. Jednak po instalacji pojawia się plik Readme z prostymi instrukcjami.

Specjalne podziękowania należą się stylinmike'owi z Edmonton za stworzenie niezbędnego narzędzia dla wszystkich programistów próbujących kodować w E Series bez konieczności używania ogromnego pliku DATEN. To najlepsze, co można uzyskać, jeśli chodzi o łatwą konfigurację kodowania w E Series.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Hasło to bimmerscene.com

Dzięki!

[TY2024]

Thank you very much!! my inpa is way out dated this helps

[romaster]

Thanks bro its perfect

[msbendts]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

Password is bimmerscene.com

Password is bimmerscene.com

---

Password is bimmerscene.com

[framer68]

Thank you so much sir!

[Quimeric]

thanks my friend

[keethesh]

Thanks, very useful

[Mr mull]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

Many thanks

[andymartin]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

[flieka]

Lots of thanks!