Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY)

[Vinn D]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

[kvlasic]

Thank you, finally

[kojacknet]

Thank you for sharing this information to us

[maadeler92]

Thank you! This helps a lot!

[viktor67]

thanks you very much

[catilapt]

thanks for sharing

[mattbatki]

Thank you for these tools for the E-Series

[rogeriofbi]

What's Installed?

- Inpa 5.0.6 (with English script files & Support for F-series)

- EDIABAS 7.3.0

- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrated SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)

- USB Drivers for cable

Why is this Beneficial?

- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)

- All the latest versions of the programs in one neat install file

- No hunting or searching for SP-DATENs then struggling to import them

- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.

- System Environment PATH variables taken care of by the installer

- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)

The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.

Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Password is bimmerscene.com

tks

[attihun]

Vad är installerat?

- Inpa 5.0.6 (med engelska skriptfiler och stöd för F-serien)

- EDIABAS 7.3.0

- NCS Expert (med engelska menyer och knappar, och NCS Dummy Profile förinstallerad)

- NCS Dummy 4.0.1

- Tool32 4.0.3

- WinKFP 5.3.1

- Integrerad SP-DATEN v53.3

- BMW Coding Tool v2.5.0 (för användning som ett alternativ till NCS Dummy, eller för att uppdatera DATEN-filer när nya blir tillgängliga)

- USB-drivrutiner för kabel

Varför är detta fördelaktigt?

- En enda installation kommer att installera ALLA program som behövs för kodning och diagnos, kommer att uppdatera programmen för att visa engelska menyer, kommer att ställa in NCSExpert med rätt NCSDummy-profil, kommer automatiskt att installera USB-drivrutiner och kommer integrerad med SP-DATEN 53.3 (JA , Integrerad!)

- Alla de senaste versionerna av programmen i en snygg installationsfil

- Ingen jakt eller sökning efter SP-DATENs och sedan kämpar för att importera dem

- LITEN filstorlek. Hela paketet är bara 170MB!! Du behöver inte ladda ner 15 GB DATEN-filer.

- Systemmiljö PATH-variabler tas om hand av installatören

- USB-drivrutin ingår och installeras automatiskt (och räknade ut om du behöver 32-bitars eller 64-bitars drivrutinen för sig)

Det ENDA som användare kan behöva göra är att konfigurera om sin COM-port till COM1 efter installationen, men en Readme-fil dyker upp efter installationen med enkla instruktioner.

Speciell kredit: att stylinmika ut från Edmonton för att skapa ett viktigt verktyg för alla kodare som försöker åstadkomma E-seriens kodning utan att behöva en massiv DATEN-fil, detta är hur bra som helst för E-seriens kodningsinställning som är enkel.

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

[/font][/size][/color]

Lösenordet är bimmerscene.com

[natthapol15726]

thank very much!!!!!!!