BMW ISTA-D 4.52.40 Standalone Activated - Torrent - NOW OPEN TO ALL MEMBERS

[Sasch83]

ISTA 4.52.4x incl EN, US, DE and CZ Language DB. Installer with Ediabas switcher.

No password required

The download isn't password protected. And for the installer you find the password in a text file in Download folder 

[https://www.mediafire.com/file/xkl249ynm...rrent/file[/hide]

No support will be given for this version, I am working on the next release:

Good work could i have the passwort ?
Big big thx

[TripleSlashM]

Hi

I’m new to this forum and would like to download this as I paid £100 for a diagnostic yesterday and feel robbed, is there instructions how to download this as I’m not very good with computers

Hi
I have just finished installing mine.
1. First of all, if you don’t have, download and install qBitTorrent. (https://www.qbittorrent.org/download)
2. If you don’t have, also download and install 7Zip (https://www.7-zip.org/download.html)
2. Download the ISTA Standalone Torrent file provided in this thread
3. Open the Torrent file and start the download. Download the file to your desktop.
4. Once the Torrent is done downloading, open the downloaded folder and run the installer.
5. Just follow the instructions on the installer, once prompted on what to install, just tick the whole Tools section, ICOM, ISTA, and the SQLiteDBs for the languages you want. Also tick the EDIBIAS changer. (You’ll get 7.3 and 7.7 and can switch between the two depending what car you’re working on)
6. Once on the interface selection, just tick everything
7. When it asks you for the installation location, just keep it to what it defaults to
8. Wait for it to install. It’ll take some time. I recommended disabling Windows Firewall and Realtime protection during the installation as I’ve noticed it greatly speeds it up.
9. Once done just boot up the icon on your desktop and it should work.

---

Thank you very much When can I get the password?

It’s in the notes inside the extracted folder. Enter the password when prompted by the installer

[Martin87]

Thanks, I don’t suppose you know what the oldest version of windows is compatible with it

[TripleSlashM]

Thanks, I don’t suppose you know what the oldest version of windows is compatible with it

Windows 10 is recommended. Not sure about Windows 7, may work but Windows 10 is the sweet spot to avoid any problems

[Martin87]

Ok thanks for your help

[Beloth]

Thx man, can i have the password please?

[oluca99]

Hello. Can i get the password for the installation please? The password in the text file does not work.

---

Hallo. Kann ich bitte das Passwort für die Installation bekommen? Das Kennwort in der Textdatei funktioniert nicht.

[DAVE69]

how to install "psdzdata" I downloaded 4.52.40 full, unpacked it to the data_swi folder and edited the registry with some file from the Internet.

[bmwnerd36]

@bmwnerd36 : check if you have a Folder called Ediabas on the root of your C: Drive , rename it to anyting you like or add 1 at the end .

Close ISTA completely , and start it again . Check if you can read the car.

Also you didn't mention anything about the car info , if it is a Gxx car , make sure you switch on the Digansotic mode ( google search if you don't know how ).

I have tried on both Fxx and Gxx vehicles (in diagnostic mode). When I try to connect by reading the VIN, the connection manager is blank. When I input the VIN manually, I see the "check vehicle interface" error.

Hi,
Can someone help me with the installation?
I got an installing error message.
And then, after proceeding and finishing the installation, I tried to connect to my E61 using a K+DCAN cable, I got the other message inside ISTA

I saw a similar Edge error when installing.

@ek1978 Please PM if you're able to help me troubleshoot further.

[PuntoMe]

hi. can u send me the pass? thank very much